Turbojet engine is designed for cruise conditions

Assignment Help Mechanical Engineering

Reference no: EM13713510

A turbojet engine is designed for cruise conditions of 600mi/hr at an altitude of 10000 meters where the ambient temperature and pressure are -50 C and 26.5 kPa, respectively. The turbojet operates at a turbine inlet temperature (T3) of 867 C and a nozzle exit temperature (T5) of 412 C. The compressor pressure ratio is 7 and the compressor efficiency of 83%. Assuming the flow to be air only and using the air tables to obtain property values, find the exit velocity from the nozzle?

Reference no: EM13713510

Questions Cloud

Decorative water fountains consist of a water reservoir : Decorative water fountains consist of a water reservoir and underground piping to and from a pump. One such system is shown schematically in the figure. The pipe material is PVC (a table is provided). The outlet line from the pump is 18 m and the inl..

Telephone service providers are now offering adsl : 4. (4 points) Telephone service providers are now offering ADSL service to home using the existing twisted-pair telephone wires. The signal can be carried up to a maximum of 1-MHz baseband with an S/N (signal power/noise power in ratio) of 30 d..

Calculate the proper diameter to prevent air entrainment : Pure Lead (density = 10, 500 kg/m3, and kinematic viscosity = 1.617X10-7 m/sec.) is poured into a sand mold. The metal level in the pouring basin is 200 mm above the metal level in the mold, and the runner is circular with a 12.7 mm diameter.

Transfer function between elevator input and pitch attitude : The transfer function between the elevator input and the pitch attitude of a plane is given by: Design an autopilot controller (using a lead compensator) for the system so that the response to a step input (pitch command) has a rise time of 1sec or l..

Turbojet engine is designed for cruise conditions : A turbojet engine is designed for cruise conditions of 600mi/hr at an altitude of 10000 meters where the ambient temperature and pressure are -50 C and 26.5 kPa, respectively. The turbojet operates at a turbine inlet temperature (T3) of 867 C and a n..

Employ lagrange interpolations to compute the values : The specific heat C of pure copper is given at 100, 200, 400, 600, and 800 K as 252, 356, 397, 417, and 433 J/kg K. Employ Lagrange interpolations to compute the values at 300 K and 500 K. Also, compute the extrapolated value at 1000 K and compare it..

Find the maximum magnitude of the acceleration : A 0.74-kg mass attached to a vertical spring of force constant 148 N/m oscillates with a maximum speed of 0.37 m/s. Find the maximum magnitude of the acceleration

Find the dipole moment : A uniform electric field of 300 N/C makes an angle of 35 with the dipole moment of an electric dipole. Find the dipole moment

estimate How many turns of wire would be required : How many turns of wire would be required to make a 120-mH inductor out of a 28.0-cm long air-filled solenoid with a diameter of 5.9cm

User Account

All Pages