Transmitting antenna and a receiving antenna

Assignment Help Electrical Engineering
Reference no: EM13867677

Telecommunications part 1 (Please show all work):

1. A signal level of 0.4μV is measured on the input to a satellite receiver.  Express this voltage in terms of dBμV. Assume a 50-Ω system.

2. A microwave transmitter typically requires a +8dBm audio level to fully drive the input.  If a +10dBm level is measured, what is the actual voltage level measured? Assume a 600-Ω system.

3. If an impedance matched amplifier has a power gain (Pout / Pin) of 15, what is the value of the voltage gain (Vout / Vin)?

4. Determine the deviation ratio for an FM system that has a maximum possible deviation of 5 kHz and the maximum input frequency is 3 kHz. Is this narrow- or wideband FM?

5. A receiver with a 10 MHz bandwidth has a S/N of 5dB and a sensitivity of -96dBm.  Calculate the NF.

6. What is the dynamic range (in dB) for a 12-bit PCM system?

7. Calculate the number of bits required to satisfy a dynamic range of 48dB.

8. The transmit power for a digital communications device is 1 W.  The data rate is 28.8kbps. Determine the energy per bit.

9. A 56kbps NRZ-L encoded data stream is used in a digital communication link.  Determine the minimum bandwidth required for the communications link.

Telecommunications part 2 (Please show all work):

1. A balanced transmission line picks up an undesired signal with a 5 mW level.  After conversion to an unbalanced signal using a center-tapped transformer, the undesired signal is 0.011μW. Calculate the common mode rejection ratio, CMRR.

2. A fast rise-time 10-V step voltage is applied to a 50-Ω line terminated with an 80-Ω resistive load. Determine the reflection coefficient Γ , EF and ER.

3. Calculate the ratio horizon for a 500-ft transmitting antenna and a receiving antenna of 20 ft. Calculate the required height increase for the receiving antenna if a 10% increase in the radio horizon were required.

4. An antenna has a maximum forward gain of 14dB at its 108-MHz center frequency. Its reverse gain is -8dB. Its bandwidth extends from 55 to 185 MHz, calculate  a) the bandwidth    and    b) the F/B ratio of the antenna.

5. Calculate the effective radiated power (ERP) of an antenna with a gain of 5 at a power of 0.5 kW.

6. The antenna in question 5 above has a forward gain of 18dB and a reverse gain of 5dB, calculate the F/B ratio of this antenna.

7. A ship radio-telephone transmitter operates at 2738 kHz.  At a distant point from the transmitter, the 2738 kHz signal has a measured field of 147mV/m. The second harmonic field at the same point is measured as 405  μV/m. How much has the harmonic emission been attenuated below the 2738 kHz fundamental?

8. Calculate the maximum usable range for a radar system with a PRT of 400 μs.

9. A green LED light source functions at a frequency of 5.7 x 1014 Hz, calculate its wavelength.

Reference no: EM13867677

Questions Cloud

Starting from a uniform distribution between : 1. Starting from a uniform distribution between (0,1). i. Generate a sequence of Rayleigh distributed random variable. (parameters: a=0, b=1).
Compute mean and the standard deviation for health issues : A recent survey of 150 executives at Elvers Industries, a large insurance and financial firm located in the Southwest, reported the number of pounds by which the executives were overweight. Compute the mean and the standard deviation.
Normal probability distribution in electrical engineering : What is the applications of normal probability distribution in electrical engineering?
Describe and design physical storage requirements : Describe and design physical storage requirements.
Transmitting antenna and a receiving antenna : Calculate the ratio horizon for a 500-ft transmitting antenna and a receiving antenna of 20 ft. Calculate the required height increase for the receiving antenna if a 10% increase in the radio horizon were required.
Find the mean and median of the flight times : Explain why the flight times are a population. Find the mean and median of the flight times. Find the range and the standard deviation of the flight times.
Describing the penny press and its innovations : Write a three to five page Mid-term Exam paper, describing the Penny Press and its innovations and contributions to mass media as we know it today
Why does socrates not fear death : Write a 700- to 1,050-word essay on the following: Why does Socrates not fear death? What are his views on death and the afterlife
Determine the vertical displacement : Determine the vertical displacement at node 3 and the rotations at node 2 and 3 by using two elements. Also compute the reaction forces and moment at nodes 1 and 2.

Reviews

Write a Review

Electrical Engineering Questions & Answers

  Lithium ion battery technology

The paper includes Lithium ion battery technology with its advantages and disadvantages. The paper discusses about the Lithium air battery in which detailed reactions of Lithium with air including nonaqueous as well as aqueous are given.

  Power transformers and tariffs

Construction of different types of power transformer, significant energy savings

  Paper on orthogonal frequency-division multiplexing

This document is shown a paper on Orthogonal frequency-division multiplexing with advantages, disadvantages and uses.

  Function of the hmi in a scada system

This assignment contains electronics engineering questions like State the commonly found components of a SCADA (Supervisory control and data acquisition) system. and decribe the function of the HMI in a SCADA system.

  Resultant waveform of the odd harmonic series

Prepare an Excel graph showing the individual components and summated resultant waveform of the odd harmonic series resulting in an approximate square wave.

  Explain scada system

Explain the function of the HMI in a SCADA system.

  Design a 2-digit 24 second shot-clock

Design a 2-digit 24 second "shot-clock" countdown timer with pushbutton controller.

  Model a discrete-time system

To understand di erent signal models To be able to model a discrete-time system and design simple signal processing algorithms.

  Draw a relay construction diagram

Draw a relay construction diagram and briefly explain the operation of a relay.

  Frequency division multiplexing

Write a short technical report on Frequency Division Multiplexing

  Impact of electron energy

Briefly discuss the impact of electron energy, electron current and target on the Bremsstrahlung generated.

  Traffic light controller

The schematic of the traffic light controller

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd