To what temperature should the rivet be cooled

Assignment Help Physics

Reference no: EM13674160

Bridge builders often use rivets that are larger than the rivet hole to make the joint tighter. The rivet is cooled before it is put into the hole. A builder drills a whole 1.2230 cm in diameter for a steel rivet 1.2250 cm in diameter. To what temperature should the rivet be cooled if it is to fit into the rivet hole that is at 20°C?

Reference no: EM13674160

Questions Cloud

What is the electric field at the aircraft : An airplane is flying during a thundercloud at a height of 1800 m. If a charge concentration of +60.0 C is above the plane at a height of 3000 m within the cloud and a charge concentration of -40.0 C is at height 1300 m, what is the electric field at..

What was his minimum vertical velocity as he left the ground : A player for a college football team blocked a field goal attempt by jumping and knocking the ball away in front of the crossbar at a point 11 feet above the field. If Owens was 6 ft. 3 in. tall, and could reach 1 ft., 11in. above his head, what was ..

Will cause the ball to land within three feet of the hole : A golfer stands 30 ft away and 3 ft below a hole on a flat raised green. If the sand wedge the golfer utilizes to hit the ball gives the ball an initial angle of 50 degrees, decide the range of velocities v0 that will cause the ball to land within th..

What constant angular velocity is required : The radial distance from the center of a centrifuge to a sample is 6m. You would like to subject the sample to a normal acceleration of 100g's. What speed of rotation in RPM is needed? If you want the centrifuge to reach this rotational speed from re..

To what temperature should the rivet be cooled : Bridge builders often use rivets that are larger than the rivet hole to make the joint tighter. The rivet is cooled before it is put into the hole. A builder drills a whole 1.2230 cm in diameter for a steel rivet 1.2250 cm in diameter.

Hot air balloons contain a fixed volume of gas : Hot air balloons contain a fixed volume of gas. When the gas is heated, it expands, and pushes some gas out at the lower open end. As a result, the mass of the gas in the balloon is reduced.

A steel tank is built to hold methanol : A steel tank is built to hold methanol. The tank is 2.000 m in diameter and 5.000 m high. It is completely full with methanol at 10.0°C. If the temperature rises to 40.0°C, how much methanol (in liters) will flow out of the tank, given that both the ..

Discover the density of the metal : A metal object is suspended from a spring scale. The scale reads 920 N when the object is suspended in air and 750 N when the object is completely submerged in water. Discover the volume of the object. Discover the density of the metal.

What is the relationship between transportation resource : What is the relationship between Transportation Resource Planning solutions and ERP solutions

User Account

All Pages