To account for water losses in the cooling tower part of

Assignment Help Mechanical Engineering
Reference no: EM13625817

The cooling water flow rate to the condensers of a big coal-fired power plant is 8,460 kg/s. The water enters the condensers at 29 C and leaves at 45 C. From the condensers, the water flows to a cooling tower, where it is cooled down back to 29 C by countercurrent contact with air. The air enters the cooling tower at the rate of 6,700 kg/s of dry air, at a dry-bulb temperature of 30 C and a humidity of 0.014 kg of water/of dry air. It leaves the cooling tower saturated with water vapor at 38 C.

(a) Calculate the water losses by evaporation in the cooling tower. The pressure in the tower is assumed to be constant at 101.3 kPa.

(b) To account for water losses in the cooling tower, part of the effluent from a nearby municipal wastewater treatment plant will be used as makeup water. The makeup water contains 530 mg/L of dissolved solids. To avoid fouling of the condenser heat-transfer surfaces, the circulating water is to contain no more than1,590 mg/L of dissolved solids. Therefore, a small amount of the circulating water must be deliberately discarded (blowdown). Windage losses from the tower are estimated at 0.2% of the recirculation rate. Estimate the makeup-water requirement.

Reference no: EM13625817

Questions Cloud

A circular coil has 200 turns a radius of 30mm and a : a circular coil has 200 turns a radius of 3.0mm and a current of 2.0a. if a proton is placed at the center of the coil
In a random sample of 1002 701 said they voted in a recent : in a random sample of 1002 701 said they voted in a recent presidential election.a find the best point estimate of the
A small fly of mass 030 g is caught in a spiders web the : a small fly of mass 0.30 g is caught in a spiders web. the web vibrates predominately with a frequency of 3.4 hz.what
Assume the population standard deviation is 95 sec : randomly selected statistics students of the author participated in an experiment to test their ability to determine
To account for water losses in the cooling tower part of : the cooling water flow rate to the condensers of a big coal-fired power plant is 8460 kgs. the water enters the
Specifically for this problem consider saturated water : it is desired to compare the results of property predictions for water near or in the saturation region using a the
The totals of the individual weights of garbage discarded : the totals of the individual weights of garbage discarded by 62 households in one week have a sample mean of 24.443 lb.
Air at 50 psia and 90 f flows at the rate of 16 lbms : air at 50 psia and 90 f flows at the rate of 1.6 lbms through an insulated turbine. if the air delivers 11.5 hp to the
Superkid finally fed up with superbullys obnoxious : superkid finally fed up with superbullys obnoxious behaviour hurls a 1.95-kg stone at him at 0.547 of the speed of

Reviews

Write a Review

Mechanical Engineering Questions & Answers

  Package design

Package Design Brief: Assume you are the packaging engineer for a large consumer products company. In this company, the Packaging Design Briefs are initiated by the marketing group and forwarded to the Package Engineering group.

  Mechanical engineering questions

Define dynamic viscosity, Determine the centroid, Pressure due to the height of liquid, Advantage of changing the liquid, Calculate the total moment about the hinge of the seal gate.

  Automatic control

DOF system and Find the differential equation describing the system

  Write a paper on boyle''s law

Write a paper on Boyle's law and describe Compression and Combustion stroke . Also explain Charles's law and illustrate SI engine and CI engine.

  Verify the law for parallelogram of forces

To Verify the law for parallelogram of forces, law for triangle of forces and law of polygon of forces. These laws are very useful to calculate unknown forces in very short time.

  Discharge pressure of the compressor

What is the discharge revised discharge pressure of the compressor.

  The Case for Global Accounting Standards

The role of IFRS in both developing and developed capital markets.

  Wind turbine

Wind turbines are becoming more and more common as a method of energy production, wind turbines by their very nature are dynamic and are subject to and create their own internal and external kinematics and kinetics.

  Advanced design methodologies

8 x product engineering and design review (week 2 – 12), ~3 pages per item which must contain a brief description of the product then delve into concepts such as materials selection, manufacturing methods, life cycle analysis, recyclability and overa..

  Design of absorption column and the cooler

Design of absorption column and the cooler. Process design of other units should be completed along with pipe sizes.

  Determine the maximum total bending moment

Determine maximum total bending moment (static plus dynamic) of the beam under steady-state conditions.

  Force of the water on the gate

Determine the magnitude of the horizontal and vertical components of the force of the water on the gate.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd