There is a way for natural gas fuel cells to be considered

Reference no: EM13345021

The two most popular types of fuel for fuel cells are hydrogen and methane (or natural gas). While hydrogen fuel cells emit nothing but water vapor, you don't find a lot of hydrogen infrastructure for getting that fuel to where it's needed. On the other hand, there is a lot of infrastructure for natural gas, but those fuel cells emit carbon dioxide as a byproduct. There is a way for natural gas fuel cells to be considered a low-carbon energy source, but they have to get their fuel from a specific source. What is that source, and why does that qualify as a low-carbon source of energy?

Reference no: EM13345021

Questions Cloud

There is a way for natural gas fuel cells to be considered : the two most popular types of fuel for fuel cells are hydrogen and methane or natural gas. while hydrogen fuel cells

Consider 250 g of water at 217degc that are mixed with 250 : consider 25.0 g of water at 21.7degc that are mixed with 25.0 g of water at 43.3degc in a foam cup calorimeter. the

One question during each cycle the velocity v in mms of a : one question during each cycle the velocity v in mms of a piston is v 6t - 6t2 where t is the time in sec. find the

A circular specimen of mgo is loaded using a three point : a circular specimen of mgo is loaded using a three point bending mode. compute the minimumnbsppossible radius of the

There is a way for natural gas fuel cells to be considered : the two most popular types of fuel for fuel cells are hydrogen and methane or natural gas. while hydrogen fuel cells

A solution is prepaired by mixing 900 ml of 500 m hcl adn : a solution is prepaired by mixing 90.0 ml of 5.00 m hcl adn 30.0 ml of 8.00 m hno3. water is then added until the final

Methyl-1-hexanol a was reacted with nabrh2so4 to give b : methyl-1-hexanol a was reacted with nabrh2so4 to give b which upon treatment with magnesium in diethyl ether formed an

Using the internet a magazine or a list of memory modules : 1 what memory modules are needed if the customer wants 1.25gb of ram?what capacities and how many of each capacity?

The end of a large tubular workpart is to be faced on a nc : the end of a large tubular workpart is to be faced on a nc vertical boring mill. the part has an outside diameter 45.0

User Account

All Pages