Theoretical inertial pressure likely cause failure

Assignment Help Mechanical Engineering
Reference no: EM13994069

Consider a garden hose that is 30 m long and 2 cm in diameter. The hose initially passes water ( Density = 1000 kg/m3) at a rate of 15 liters per minute. If the flow rate decreases linearly by 150 lit/s2, what is the inertial pressure generated in the hose? Would this theoretical inertial pressure likely cause failure of the hose?

Reference no: EM13994069

Questions Cloud

A cylinder with a diameter of 7 cm : A cylinder with a diameter of 7 cm and a height of 20 cm is filled with an unknown fluid.
How is derivatives settlement different from securities : How is derivatives settlement different from securities settlement?
How does air entrancement : How does air entrancement influence the natural frequency of a hydraulic cylinderder?
Minimum natural frequency of a hydraulic cylinder : Calculate the minimum natural frequency of a hydraulic cylinder (L = 25 cm) and (D = 4 cm) connected to a 45 kg load when the hydraulic fluid is an oil with B= 1.7 GPa
Theoretical inertial pressure likely cause failure : Consider a garden hose that is 30 m long and 2 cm in diameter. The hose initially passes water ( Density = 1000 kg/m3) at a rate of 15 liters per minute. If the flow rate decreases linearly by 150 lit/s2, what is the inertial pressure generated in th..
Should citizens produce anticipate taking out a loan during : Prepare a monthly cash budget for Citizens Produce Co-op for the quarter ended September 30. Accounting Connection. Should Citizens Produce anticipate taking out a loan during the quarter? If so, how much should it borrow, and when?
What extra cost does the hospital incur-cycle-service level : Wood County Hospital consumes 1,000 boxes of bandages per week. The price of bandages is $35 per box, and the hospital operates 52 weeks per year. The cost of processing an order is $15 and the cost of holding one box for a year is 15 percent of the ..
Why might otc derivatives be considered more risky : Why might OTC derivatives be considered more risky than exchange-traded derivatives?
Hydraulic fluid : Hydraulic fluid ( density= 840 kg/m3) passes through a knife-edged orifice, characterized by Cd = 0.6 at a volumetric flow rate of 2 liters per minute. If the pressure drop across the orifice is 2 kPa.what is the cross sectional area of the orifice?

Reviews

Write a Review

Mechanical Engineering Questions & Answers

  A closed piston-cylinder with air expands and does 2000

a closed piston-cylinder with air expands and does 2000 ft-lbs of work. heat is added in the amount of 4 btu. what is

  Minimum weight design of a variable shape three-bar

minimum weight design of a variable shape three-bar truss.numerical solution using the matlab optimization toolbox

  If the average convection heat transfer coefficient is 55

hot air at 800c is blown over a 2-m x 4-m flat surface at 300c. if the average convection heat transfer coefficient is

  Calculate the alloy composition in weight percent

An alloy contains 105.0 kg of iron, 0.2 kg of carbon, and 1.0 kg of chromium. Calculate the alloy composition in weight percent. Calculate the alloy composition in atom percent.

  Gravitational acceleration

If an elevator starting from rest accelerates at 10 m/s^2 and then decelerates at -1 m/s^2 until it reaches the top floor at 100m, calculate the shortest time it takes for it to reach the top floor (ignore gravitational acceleration, assume g=0). plo..

  If electricity costs 85 cents per kwh determine the actual

a heat pump with a coefficient of performance of 3.5 provides energy at an average rate of 70000 kjh to maintain a

  Determine the heat transfer during the process

A tank of 20 ft3 volume is half-filled with liquid water, and the remainder is filled by vapor at 550 psia. The water is heated until one-half of the liquid (by volume) is evaporated, while an automatic valve lets saturated vapor escape at such a rat..

  Find a the approximate location of the laminar turbulent

air at -10 degree c flows over a smooth sharp-edged almost-flat aerodynamic surface at 240 kmhr. the surface is at 10

  A tube of diameter 50 mm having a surface temperature of

a tube of diameter 50 mm having a surface temperature of 85degc is embedded in the center plane of a concrete slab

  1 with reference to basic constructional features contrast

1. with reference to basic constructional features contrast the methods of compression employed by positive

  Determine the factors of safety and state whether or not

a steel has the following material properties syt 40 kpsi syc 60 kpsi and epsilonf 0.06. determine the factors of

  Refrigerant-134a is being transported at 1kgs through a

refrigerant-134a is being transported at .1kgs through a teflon tube of inside diameter di 25mm and outside diameter

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd