The pressure is maintained constant in the cylinder

Assignment Help Mechanical Engineering

Reference no: EM13711525

A piston-cylinder device contains 12 kg of saturated R-134a vapor at 3.2 bars. An electric source supplies 8 A current to a resistor within the cylinder for 4 minutes and there is heat transfer of 400 kJ to the system. During these energy interactions, the pressure is maintained constant in the cylinder. The refrigerant reaches a final temperature of 700C.

Determine (a) the voltage of the source.

(b) Show the expansion process for the R-134a on a P-v diagram. Label states, show property values, and indicate appropriate lines of constant pressure

Reference no: EM13711525

Questions Cloud

Determine the mixture temperature leaving the mixing chamber : In air-conditioning systems, streams of cold and warm air are mixed to get air with the right temperature. Consider a mixing chamber into which cold air enters at 8C and 100 kPa at a rate of 0.55 m^3 /s and warm air enters at 300C and 100 kPa. The ra..

Throttled from saturated liquid state : Refrigerant-134a is throttled from saturated liquid state at 7 bar to a pressure of 1.4 bar. Determine the temperature drop during this process and the final specific volume.

Calculate the coefficient of performance of the heat pump : A heat pump supplies 40 kW of heat to maintain the inside of a house at 250C in cold winter months when the ambient temperature is 00C. Power required to operate the heat pump cycle is provided by a heat engine cycle which receives 10 kW of heat from..

What is the volume occupied by each gas at equilibrium : An insulated rigid container is separated into two parts using a partition that is free to move and the partition allows heat transfer without any energy storage by itself. Initially 2 kg of air at 5 bar and 350 K is contained on one side of the part..

The pressure is maintained constant in the cylinder : A piston-cylinder device contains 12 kg of saturated R-134a vapor at 3.2 bars. An electric source supplies 8 A current to a resistor within the cylinder for 4 minutes and there is heat transfer of 400 kJ to the system. During these energy interaction..

Velocity of the fluid at the nozzle exit : Show that the thrust developed by a stationary rocket motor is F = rho*A*U^2 + A(p- p_atm) where p_atm is the atmospheric pressure, and p, rho, A, and U are, respectively, the pressure, density, area, and velocity of the fluid at the nozzle exit.

Statement regarding the fracture of materials : Polymer fracture is highly dependent on the testing conditions, such as temperature and strain rate, but is not affected by the nature of bonding of the molecular chains. For metals, fracture only occurs along the boundaries created by the differentl..

Vibration of the cone as function of the forcing frequency : A speaker driver can be modeled as a one degree of freedom forced system with damping. The mass of the moving cone is m=0.1 kg and the spring k=50000N/m.

Determine the net work output and thermal efficiency : A gas turbine power plant operates on the simple Brayton cycle between the pressure limits of 100 and 1600 kPa. The working fluid is air, which enters the compressor at 40 degrees Celsius and leaves at 650 degrees Celsius. Using constant specific hea..

User Account

All Pages