The power developed by the turbine

Assignment Help Mechanical Engineering

Reference no: EM13719887

A gas turbine has a mixture of 17% CO2 , 60% N2 and 17% H2O on a molar basis enter at 1800°R and 116 psi and a mass flow rate of 4.41 lbm/s. The gas expands through the turbine isentropic ally to a pressure of 14.7 psi and a temperature of 1112.4°R.

Determine:

The power developed by the turbine in (Hp)

Reference no: EM13719887

Questions Cloud

How many pump stations would be needed for a pipeline : 200mm DN pipeline has to deliver 80m³/h of water at a discharge pressure of 5,550 kPa. Approximately how many pump stations would be needed for a pipeline 300km long?

Pole-vaulter is holding the vaulting pole parallel : A pole-vaulter is holding the vaulting pole parallel to the ground. the pole is 5 m long. The vaulter grips the pole with his right hand at the top end of the pole and with his left hand 1 m from the top end of the pole. the mass of the pole is 2.5 k..

Find the frequency of the radiation of maximum intensity : The walls of a blackbody cavity are at a temperature of 27oC. What is the frequency of the radiation of maximum intensity

A closed system consists of an ideal gas : A closed system consists of an ideal gas with constant specific heats that remain constant. The gas undergoes a process in which the temperature increases from T1 to T2.

The power developed by the turbine : A gas turbine has a mixture of 17% CO2 , 60% N2 and 17% H2O on a molar basis enter at 1800°R and 116 psi and a mass flow rate of 4.41 lbm/s. The gas expands through the turbine isentropic ally to a pressure of 14.7 psi and a temperature of 1112.4°R.

Amagots law and the generalized compressibility chart : A rigid tank contains 2 kmol of N2 and 6 kmol of CH4 gases at 200 K and 12 MPa. Estimate the volume of the tank using Amagot’s Law and the generalized compressibility chart

What is the molecular weight of the mixture : A gas mixture exists composed of 45% O2, 35% CO2 and 20% Ar on a molar basis. The pressure of the gas is 1 atm and the temperature is 50°F.

Determine collars velocity and acceleration at this instant : Collar C moves along rod BA with a velocity of 3 m/s and an acceleration of .5 m/s^2 both directed from B towards A and measured relative to the the rod. At the same instant, rod AB rotates with the angular velocity and angular acceleration shown. De..

A material with a true stress strain curve : A material with a true stress strain curve? = 350 E0.25 MPa is used in wire drawing. Calculate the maximum reduction in cross sectional area per pass based on ideal conditions.

User Account

All Pages