User Account

All Pages

The plant generates 20mw of electricity and uses coal with

Assignment Help Mechanical Engineering
Reference no: EM13643411

A power plant has an overall efficiency of 30%. The plant generates 20MW of electricity, and uses coal with a heating value of 28 MJ/kg as the fuel. Determine how much coal in tonnes per day must be burned to sustain the generation of 20MW of electricity.

Reference no: EM13643411

Questions Cloud

If the water has an initial temperature of 25 degrees : a pot full of water 4l is to be placed on a stove until it boils. the stove element puts 2500w into the water in the
The cold reservoir for this plant is a pool of water : imagine that a site in iceland is discovered where temperatures a relatively short distance below the surface of the
The exhaust from a natural gas heating is expelling : the exhaust from a natural gas heating is expelling combustion products at a rate of 10 mole per minute. on a mass
What is the maximum electric power that could be produced : imagine a solar electric power plant that operates by using a gigantic mirror to concentrate light on the boiler for a
The plant generates 20mw of electricity and uses coal with : a power plant has an overall efficiency of 30. the plant generates 20mw of electricity and uses coal with a heating
A 3-g bullet flying at 420 ms hits a 22-kg aluminum block : a 3-g bullet flying at 420 ms hits a 2.2-kg aluminum block and embeds itself in the aluminum. after everything has come
Using data tables and the answer to a calculate hdegf for : a sample of sucrose c12h22o11 weighing 0.1265 g is burned in a bomb calorimeter. after the reaction is over it is found
Imagine that you have a gas confined in an insulated : imagine that you have a gas confined in an insulated cylinder by a piston. imagine that you suddenly push hard on the
Determine the mass flow rate of fuels in grams per second : determine the mass flow rate of fuels in grams per second from the gasoline tank to the cars fuel injection systems and

Reviews

Write a Review

Mechanical Engineering Questions & Answers

  Determine the pressure in bar using the ideal gas law kays

a gaseous mixture consisting of 0.75 kmol of hydrogen and 0.25 kmol of nitrogen occupies 0.085 m3 at 25degreec

  A small bucket of water is swinging above a persons head at

a small bucket of water is swinging above a persons head at a constant angular speed of 10rads. the rope is 1 m long

  Determine the pressure in lbfin2 at the bottom of the tank

the pressure from water mains located at street level may be insufficient for delivering water to the upper floors of

  At this state the piston is 01 m from the cylinder bottom

saturated water vapor at 200 kpa is in a constant-pressurepiston cylinder assembly. at this state the piston is 0.1 m

  Find the rate of heat transfer and if the outer surface is

a wall is 2m high by 3m wide and 20cm thick. it is made of a material with a k.5 wmk. a temperature difference of 60

  Heat is slowly removed from the steam during a constant

saturated steam at 2 mpa is contained in a piston-cylinder device. the initial volume is 0.25 cubic meters. heat is

  Determine the components of force reaction

The link lies in a plane parallel to the y-z plane and the bearings are properly aligned on the shaft.

  A rigid container of volume 1 m3 contains 1613 kg of h2o of

a rigid container of volume 1 m3 contains 16.13 kg of h2o of an unknown phase. the pressure of the h2o is initially 7

  Sketch the cycle on p-v coordinates

One kilogram of air as an ideal gas executes a Carnot power cycle having a thermal efficiency 50%. The heat transfer to the air during isothermal expansion is 50 kJ. At the end of the isothermal expansion, the pressure is 574 kPa and the volume is..

  Determine the pipe diameter considering that concrete pipe

a water line is planned to connect a new reservoir to an existing water treatment plant. the average water surface

  Compute the transit time of an electron

Consider the 2.0micrometer long GaAs device where the E-field is 5kV/cm and Mn*=.067M0. Calculate the transit time of an electron through the device if the mobility is 8000 cm^2V-s.

  The chute is deployed is -0000180v2 speed v in feet per

the 244000-lb space-shuttle orbiter touches down at about 230 mihr. at 193 mihr its drag parachute deploys. at 35 mihr

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

Submit Assignment

Academics

Major Subjects

Majors

Get In Touch

whatsapp: +1-415-670-9521

Phone: +1-415-670-9521

Email: [email protected]

TERMS & POLICIES

HELP & SUPPORT

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd