The model of a tidal channel in a coastline study

Assignment Help Mechanical Engineering

Reference no: EM13719037

The model of a tidal channel in a coastline study is scaled to 1/100 of actual size. Fresh water is to be used in place of seawater in the model. Assuming that the Reynolds number must be matched, what model velocity is needed to ensure dynamic similarity? Will similarity also be achieved for free surface effects related to the Froude number? In your calculations, note that the appropriate velocity and length scales for the actual tidal channel are V = 0.5 m/s and L = 10 m, respectively. (Same Re for both model and the prototype)

Reference no: EM13719037

Questions Cloud

An ideal otto cycle has a compression ratio : An ideal Otto cycle has a compression ratio of 13.5, takes in air at 95kPa and 20°C and is repeated 940 times per minute. Using constant specific heats at room temperature, determine the thermal efficiency of this cycle

Determine the minimum pressure in the cycle : Consider a Carnot cycle executed in a closed system with air as the working fluid. The maximum pressure in the cycle is 730 kPa while the maximum temperature is 750 K. If the entropy increase during the isothermal heat rejection process is 0.31 kJ/kg..

Air-standard cycle with variable specific heats is executed : An air-standard cycle with variable specific heats is executed in a closed system and is composed of the following four processes: Isentropic compression from 100 kPa and 27 degrees C to 1.11 MPa. P = constant heat addition in amount of 3,020 kJ/kg

Determine the final equilibrium temperature : A container filled with 97 kg of liquid water at 95ºC is placed in a 82-m3 room that is initially at 13ºC and 1 atm. Thermal equilibrium is established after a while as a result of heat transfer between the water and the air in the room.

The model of a tidal channel in a coastline study : The model of a tidal channel in a coastline study is scaled to 1/100 of actual size. Fresh water is to be used in place of seawater in the model. Assuming that the Reynolds number must be matched, what model velocity is needed to ensure dynamic simil..

Two standard gears have a diametral pitch : Two standard gears have a diametral pitch of 12 and a gear ratio of 7.0. The center distance is 8 in. Determine the number of teeth on each gear.

Role of international business at the company : Role of organisational behaviour at the company, human resource management practices at the company and role of international business at the company.

Thin films of amorphous si are used for solar cells : If silicon is cooled quickly, it will form a glass instead of crystallizing. One way to do this is to deposit Si atoms onto a cold substrate, with H added to remove defects; these thin films of amorphous Si (with H) are used for solar cells.

Calculate the power developed by the turbin : An ideal Rankine cycle uses water as its working fluid. The mass flow rate of water through the cycle is 150 kg/s. saturated vapour enters the turbine at 15 MPa and saturated liquid enters the pump at 10 kPa. Cooling water passes through the condense..

User Account

All Pages