The model is five times larger than the prototype

Assignment Help Mechanical Engineering

Reference no: EM13714140

The flow around a model of a turbine blade is investigated. The model is five times larger than the prototype. A maximum pressure of 4 psi is measured at the leading edge, a maximum velocity of fps is measured near the top of the blade, and a small device attached to the surface measures a shear stress of 0.02 psi at a particular location. Determine the associated quantities to be expected on the prototype if water is the fluid for both cases.

Reference no: EM13714140

Questions Cloud

Cable drum for a crane is to rotate : A cable drum for a crane is to rotate between 160 and 166 rpm. Design a gear drive for 25 hp in which the input pinion rotates at 925 rpm and the output rotates with the drum. The crane is expected to operate with a 50% duty cycle for 120 hours per w..

Evaluate the magnitude of the electric field between plates : The gap between the plates of a parallel plate capacitor is 7.3 mm. When the plates are charged with a 4.0 V battery, What is the magnitude of the electric field between the plates

The effects of your point mutant allele on the pka : You would like to study the effects of your point mutant allele on the PKA-induced gene CRBI1in response to a short burst of octopamine, a fly hormone similar to norepinephrine. However, you cannot reliably control the release of octopamine in..

Evaluate the potential difference across the capacitor : A 3.0cm × 3.0cm parallel-plate capacitor has 3.0mm spacing. The electric field strength inside the capacitor is 1.5×105V/m. What is the potential difference across the capacitor

The model is five times larger than the prototype : The flow around a model of a turbine blade is investigated. The model is five times larger than the prototype. A maximum pressure of 4 psi is measured at the leading edge, a maximum velocity of fps is measured near the top of the blade, and a small d..

Steadily through a horizontal tube at a constant temperature : Air is flowing steadily through a horizontal tube at a constant temperature of 32 deg C and a mass flow rate of 1 kg/s. At one point upstream where the tube diameter is 50 mm, the pressure is 345 kPa. At another point downstream the diameter is 75 mm..

One reasonable answer for each aspect of growth : Below are several plant attributes that could be measured. For each attribute, provide one brief description of how it could affect the outcome of competition. There is more than one reasonable answer for each aspect of growth. The first aspect..

Heat transfer rate from the heat engine to cold reservoir : A heat engine operates between reservoirs at 1000 and 300 K. Some of the power output from the heat engine drives a refrigerator which operates between 250 and 300 K. The heat-transfer input at 1000 K to the heat engine is 1000 kJ, and the heat trans..

The orientation of the receptor is appropriate : You have created a point mutant allele of your receptor that lacks the phosphorylation sites for theGPCR-regulated kinases, but you are concerned that it may not insert properly into the plasma membrane, with the N-terminus on the extracellula..

User Account

All Pages