The extrusion ratio-die geometry and extrusion speed

Assignment Help Mechanical Engineering

Reference no: EM13710387

The extrusion ratio, die geometry, extrusion speed, and billet temperature all affect the extrusion pressure. Explain why.

Reference no: EM13710387

Questions Cloud

Property for given state and show on stated state diagram : Determine the property for the given state and show on stated state diagram:

Head space under slight vacuum-piped to natural gas boiler : 100 kmol/h of biogas (75 mol% CH4 and 25 mol% CO2) is produced in a digester and is drawn off from the headspace under a slight vacuum and piped to a natural gas burning boiler. A slight leak develops in the pipe allowing air (79 mol% N2 and 21 mol% ..

Boundary conditions for both the pipe and the insulation : Write the appropriate form of the heat equation along with reasonable boundary conditions for both the pipe and the insulation.

Determine net work output and thermal efficiency : A Rankine cycle with reheat operates between 20 kpa & 12.5 Mpa with a reheat occurring at 1.2Mpa. Steam enters both the high and low pressure turbine at 500 C, and the enthalpy of steam at the exit of high and low pressure turbines are 3050 and 2600 ..

The extrusion ratio-die geometry and extrusion speed : The extrusion ratio, die geometry, extrusion speed, and billet temperature all affect the extrusion pressure. Explain why.

Find the mass of the gas : A piston/cylinder device initially contains 0.1 cu. m. of air at 27 C. A very light piston that moves without friction is connected to a spring that is initially at its equilibrium position (no force). The spring constant is 100 kN/m and the area of ..

Compute the fugacity’s of ethane and n-butane : Compute the fugacity’s of ethane and n-butane in an equimolar mixture at 373.15K at 1, 10, and 15 bar total pressure assuming that the Lewis-Randall rule is correct.

Heater keeps the temperature within the tank constant : A 380-liter tank contains steam, initially at 300 kPa and 400°C. A valve is opened and steam flows out of the tank at a constant rate of 0.005 kg/s. During this process, a heater keeps the temperature within the tank constant.

Mechanical properties : I am interesting in seeing the equations to find the strengths of a aluminium 6061 tube at 36in x 3in x 3in with 1/4in wall. This is more of a review for me. Would like to see the equations at work. For an example, say I am building a device that req..

User Account

All Pages