The average power output required from one turbine

Assignment Help Physics
Reference no: EM13653244

Total required annual electrical energy output from the wind farm =120 TJ
Max number of turbines for which there is space on the farm =20.
Average annual wind speed at the site= 9.0 ms^-1

a) Deduce that the average power output required from one turbineis 0.19 MW
b) Estimate the blade radius of the wind turbine that will give0.19 MW Power output. (density of air= 1.2 kg m^-3)

Reference no: EM13653244

Questions Cloud

How much work is done on the car by friction : A car of mass 2000 kg rounds a circular turn of radius 10 m. If the road is flat and the coefficient of static frictionbetween the tires and the road is 0.8, how much work is done on the car by friction
What is the temperature at the steel cu surface : A 60 cm long steel rod with a diameter of 4 cm is mated to a 40 cm long Cu rod with the same diameter. the unmated end of the steel rod( not at the interface) is connected to a 140 degrees C heat source, while the far end of the Cu( not at the int..
Explain which is deposited as slightly soluble sodium urate : Gout is caused by an error in nucleic acid metabolism that leads to a buildup of uric acid in body fluids, which is deposited as slightly soluble sodium urate (C5H3N4O3Na) in the soft tissues of joints.
Estimate what average upward force did the water exert : A high diver of mass 70kg jumps off a board 10 meters above the water. what average upward force did the water exert on the on the diver
The average power output required from one turbine : Total required annual electrical energy output from the wind farm =120 TJ Max number of turbines for which there is space on the farm =20.
Find out the molarity of a salt solution : Determine the molarity of a salt solution of 150g of NaCl in 540g of water. Assume the density of water is 1.0g/mL. (MWNaCl = 58.44 g/mol)
What was the charge on the original positive sphere : Two identical conducting spheres, fixed in place, attract eachother with an electrostatic force of .220 N when theircenter-to-center separation is 80cm. What was the charge on the original positive sphere
Single pane glass window problem : A single pane glass window of 5 mm thickness and dimensions 3ft x 2ft is positioned vertically. if the inside temperature is 74 degrees F and the outside temp is 88 degrees F, determine how much heat enters the house through the window in 1 hour.
Find the probability that the sample standard deviation : What is the probability that the average amount dispensed in a random sample of size 10 is at least 204 milliliters -  What is the probability that less than four correct answers in quiz 2?

Reviews

Write a Review

Physics Questions & Answers

  Find the magnitude of the resulting magnetic field

A sphere of radius R is uniformly charged to a total charge of Q. It is made to spin about an axis that passes through its center with an angular speed ω. Find the magnitude of the resulting magnetic field at the center of the sphere.

  Find the equivalent resistance

A resistor is in the shape of a cube, with each side of resistance  R . Find the equivalent resistance between any two of its adjacent corners.

  What is the electric field at the location

Question: Field and force with three charges? What is the electric field at the location of Q1, due to  Q 2 ?

  What is the maximum displacement of the bridge deck

What is the maximum displacement of the bridge deck?

  What is the magnitude of the current in the wire

What is the magnitude of the current in the wire as a function of time?

  Blackbody

Questions on blackbody, Infra-Red Detectors & Optic Lens and Digital Image.

  Gravity conveyor

Illustrate the cause of the components accelerating from rest down the conveyor.

  Calculate the dc voltage

Calculate the dc voltage applied to the circuit.

  Quadrupole moments in the shell model

Quadrupole moments in the shell model

  Determine the tension in each string

Determine the tension in each string

  Introductory mechanics: dynamics

Calculate the smallest coefficient of static friction necessary for mass A to remain stationary.

  Evaluate maximum altitude

Evaluate maximum altitude?

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd