Test your program for robotic calibration in xyz coordinate

Assignment Help Other Engineering
Reference no: EM131061412

Robotics and Mechatronics

Objective:

1. To learn the basics of a robot (ABB IRB 120)
2. To learn about the robot controller.
3. To learn to teach points.
4. To write a simple program.

Introduction

The IRB 120 is one of ABB Robotics generation of 6-axis industrial robots designed specifically for manufacturing industries that use flexible robot based automation. The robot has an open structure that is especially adapted for flexible use, and can communicate extensively with external systems.

Requirements: 1. Create a simple program as described in the handout. Test your program for robotic calibration in XYZ coordinate.

2. Gently but firmly mount a pencil or marker on the robot gripper. Jog the robot to a position in which the pencil point touches a corner point of a square 50mm x 50mm. Move the robot to all the corner points (actual) using FlexPendant. Record the positions (X, Y, Z) the robot moves.

3. Try four different speeds: 125, 250, 500, and 1000 mm/s with Zone = 0 for running the program and record the cycle time for each test.

4. Plot a graph of cycle time vs. speed (mm/s).

5. Address the difference between the actual cycle time and the calculated cycle time.

Attachment:- Robotics and Mechatronics Lab.pdf

Reference no: EM131061412

Questions Cloud

What is the compressibility exponent for the cake : What is the compressibility exponent for the cake if the resistance of the filter medium is negligible?
Systolic blood pressure reading : Given that 200 people were aged between 25 and 40, approximately how many had a systolic blood pressure reading between 130 and 149 inclusive?
Provide an analysis of the data : Using three sources in the ITT Tech Virtual Library, research the correlation, "Do violent video games contribute to youth violence?" and take a stand. Write a cohesive report describing your stand and substantiate your stand with at least two fac..
Estimate the total filtering area required for the new unit : Fraction of filtering area submerged in the slurry = 0.2 r/min = 2
Test your program for robotic calibration in xyz coordinate : Gently but firmly mount a pencil or marker on the robot gripper. Create a simple program as described in the handout. Test your program for robotic calibration in XYZ coordinate.
Convert the z-score back to the actual number : Shade the bell curve, use the z-table to find the z-score that corresponds to 15%, convert the z-score back to the actual number.
Disadvantages of baosteel foreign direct investment : Analyze the fundamental advantages and disadvantages of Baosteel's Foreign Direct Investment (FDI) strategy versus the other international strategies for expansion
Estimate the cost of the steel for the spherical storage : Estimate the cost of the steel for the spherical storage tank in the preceding problem if the steel sheet costs $0.25 per pound. On the basis of the data presented in Fig. 14-56, estimate the fraction of the purchased cost of the tank that is due ..
Average commuting time for people : According to a national survey, the average commuting time for people who commute to a city with a population of 1 to 3 million is 19.0 minutes.

Reviews

Write a Review

Other Engineering Questions & Answers

  Test a basic working prototype

The project is aimed to model, design, Build and test a basic working prototype that can sense, count and record the passenger number as they enter and leave a train carriage.

  What were the causes of the incident

What were the causes of the incident? What regulations were passed as a result of this incident? What is sustainability? Describe how LCA (Life Cycle Assessment) helps in developing environmental friendly products

  Measured lift and drag coefficients

The measured lift and drag coefficients for each rotor were about 10 and 4, respectively. If the ship is moored and subjected to a crosswind of 25 ft/s, as in Fig, what will the wind force parallel and normal to the ship centerline be? Estimate th..

  Show which alternative maximizes expected value

Outcomes for the three alternatives are expected to be (1) $2,000 in boom or $500 in bust for ORC; (2) $6,000 in boom but $-5,000 (loss) in bust for FBN; and (3) $1,200 for the certificate in either case. Set up a payoff table (decision matrix) fo..

  Biometrics verification is just one way companies are using

biometrics verification is just one way companies are using technology to help. this week we will discuss biometric

  Block diagram system performance and responses1 simplify

block diagram system performance and responses1. simplify the above block diagram and determine the closed diagram

  What is minimum input step size that will ensure triggering

Use capacitors of 0.1 nF and 1 nF. Wherever possible, choose resistors of 100 kΩ in your design. Diodes have a drop of 0.7 V. What is the minimum input step size that will ensure triggering? How long does the circuit take to recover to a state in ..

  Prove that the points are edges of a square

Given four points in Cartesian coordinates as S(4,0,0),t(0,4,-4),U(8,4,-4)and v(4,8,-8) prove that the points are edges of a square. all distances are

  Build an interactive matlab

The project objective is to design and build an interactive Matlab based interface meant for a complete steady state analysis of to a transmission line (short, medium and long). The design is using table A4 data.

  What additional power can be saved

A collection of logic gates for which the static power dissipation is zero, and the dynamic power dissipation is 10 mW is operating at 50 MHz with a 5-V supply. By what fraction could the power dissipation be reduced if operation at 3.3 V were pos..

  Construct the duobinary coder output-corresponding

The binary data stream 001101001 is applied to the input of a duobinary system. (a) Construct the duobinary coder output and corresponding receiver output, without a precoder.

  What test can you perform to ensure that steel will adequate

You have a length of steel of about 20 × 20 mm section that must be used to urgently replace a broken member. What tests can you perform to ensure that the steel will be adequate?

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd