Tensile strength of the steel before and after cold-working

Assignment Help Mechanical Engineering

Reference no: EM13709633

Using the data shown in Callister Figure 7.19, draw an approximate stress-strain curve for the 1040 steel at 0% cold work and at 30% cold work, clearly indicating the yield strength, ductility, and tensile strength of the steel before and after cold-working (Young’s modulus of steel E = 250 MPa).

Reference no: EM13709633

Questions Cloud

Compute the average density of a solid solution : Compute the average density of a solid solution which contains 10 kg of gold, Ag, and 90 kg of silver, Au. The density of pure gold is 19.32 g/cm3 and the density of pure silver is 10.49 g/cm3

Same surface concentration of carbon applied : You are considering two different diffusion processes involving Carbon into FCC iron. The first process is carried out at 900 oC for 3 hours and produces a carbon concentration of 0.20 wt% at a depth of 2 mm. At what depth would this concentration oc..

The airplane travels before hitting the slope : A paper airplane is thrown up a hill with slope theta = 16.26 deg during a rainstorm. The airplane has an initial speed of 10 ft/s and is fired at an angle of phi=32.52 deg from the horizontal. Rain accumulation on the wings results in a vertical acc..

Find the input-output equation using the p-operator : Find the input/output equation using the P-operator approach when x2 is the output.

Tensile strength of the steel before and after cold-working : Using the data shown in Callister Figure 7.19, draw an approximate stress-strain curve for the 1040 steel at 0% cold work and at 30% cold work, clearly indicating the yield strength, ductility, and tensile strength of the steel before and after cold-..

Ductility compare for pure iron vs. the alloy steel : Using the data shown in Figures 6.14 (at 25oC) and 6.21, combine both curves onto one plot, being careful to correctly plot the modulus, yield strength, tensile (ultimate) strength, and ductility. Discuss how the modulus, yield strength, and ductilit..

Theoretical maximum height that a pump could pull water : Determine the theoretical maximum height that a pump could pull water up from a well (i.e. from the vacuum side of the pump). The set-up described is similar to on-farm wells. Assume that atmospheric pressure is exerted on the water at the bottom of ..

Assume compressible flow-airfoil is moving through the air : An airfoil is moving through the air at 300 mph at 15,000ft pressure altitude. The temperature recorded is 45F.(Assume Compressible Flow) At a point on the airfoil upper surface is 360 mph. What is the pressure at this point? if this be the average p..

Simple inverting comparator circuit with hysteresis voltage : Design a simple inverting comparator circuit with a hysteresis voltage of 120 mv and a nominal threshold of +2.5 v indicate component values.

User Account

All Pages