Temperature in the cylinder immediately after filling

Assignment Help Mechanical Engineering

Reference no: EM13703806

As part of a super-critical extraction of coal, an initially evacuated cylinder is fed with steam from a line available at 20 mPa and 400 degrees C. What is the temperature in the cylinder immediately after filling? (Answer to problem is 454 degrees Celsius).

Reference no: EM13703806

Questions Cloud

What specific materials are used for solar cells : What specific materials are used for solar cells? What specific properties these materials process in order for the solar cells to the function properly?

Double-pipe heat exchanger : Double-pipe heat exchanger. This type of heat exchanger is composed of concentric pipes, with hot water flowing in the inner pipe while cold water flows in the annulus between the inner pipe wall and outer pipe wall.

Mass of oxygen gas in a container with a volume : What is the mass of oxygen gas in a container with a volume of 25 ft3, at a pressure of 14.7 psia and a temperature of 75oF?

Determine the radial wall thickness-speed in rpm : A flat disk of outer radius b-125mm and inner radius a=25mm is shrink-fitted onto a shaft of radius 25.05mm. Both members are made of steel with E=200Gpa, v=0.3, and p=7.8 KN.s2/m4. Determine (a) the speed in rpm at which the interface pressure becom..

Temperature in the cylinder immediately after filling : As part of a super-critical extraction of coal, an initially evacuated cylinder is fed with steam from a line available at 20 mPa and 400 degrees C. What is the temperature in the cylinder immediately after filling? (Answer to problem is 454 degrees ..

Temperature of refrigerant at end of the heating process : A rigid tank is heated for 9 minutes with a 800W electrical heater. During this time 70kJ of energy is lost due to heat transfer to the environment. Find the temperature of the refrigerant at the end of the heating process.

Determine the rate of evaporation of water : Water is boiled at sea level (1 atm pressure) in a pan placed on top of a 2-kW electric burner that transfers 60% of the heat generated to the water. Determine the rate of evaporation of water in kg/s.

What is the smallest allowable length of the robot arm : A robot arm carrying a 2.75-lb package is moving in a horizontal circle at 4 miles/hr. The arm is gradually shortened for the first 0.11 s of its motion, changing the radius of the circle. The maximum acceleration the package can withstand without da..

Air-an ideal gas is isentropic ally compressed : Air, an ideal gas, is isentropic ally compressed from V1 = .36 ft^3, P1 = 14.5 psia, T1 = 70 F, to V2 = .03 ft^3 (compression ratio = 12). Find T2, P2 and W (work in Btu) for this process:

User Account

All Pages