Temperature and heat flux measurements

Assignment Help Mechanical Engineering

Reference no: EM13946602

A solid of arbitrary shape is suspended in atmospheric air having a free stream temperature and velocity of 20°C and 100 m/s, respectively. The solid has a characteristic length of 1 m, and its surface is maintained at 80°C. Under these conditions measurements of the convec- tion heat flux at a particular point (x*) on the surface and of the temperature in the bound- ary layer above this point (x*, y*) reveal values of 104 W/m2 and 60°C, respectively. A mass transfer operation is to be effected for a second solid having the same shape but a characteristic length of 2 m. In particular, a thin film of water on the solid is to be evapo- rated in dry atmospheric air having a free stream velocity of 50 m/s, with the air and the solid both at a temperature of 50°C. What are the molar concentration and the species molar flux of the water vapor at a location (x*, y*) corresponding to the point at which the temperature and heat flux measurements were made in the first case?

Reference no: EM13946602

Questions Cloud

Interprets a situation determine its outcome : Question 1 Why does the way one interprets a situation determine its outcome? Describe an example of a personal challenge you face that could be interpreted differently.

Walters company produces : Walters Company produces 15,000 pounds of Product A and 30,000 pounds of Product Beach week by incurring a joint production cost of $400,000.

Lead asbestos benzene methylene chloride : OSHA is the only federal agency that publishes exposure limits. The EPA was founded in 1972. EPA limits are legally enforceable. The EPA publishes exposure limits under the Toxic Substances Control Act.

Harris corporation produces a single product : Harris Corporation produces a single product

Temperature and heat flux measurements : What are the molar concentration and the species molar flux of the water vapor at a location (x*, y*) corresponding to the point at which the temperature and heat flux measurements were made in the first case?

Creating new information technology systems for a company : Communication - key; the more they know, the less likely there will be opposition or opposition will be mitigated; email, reports, meetings

Find the height to which the water can be delivered : Find the height to which the water can be delivered - A centrifugal pump delivers water at the rate of 0.22 m3/s from a reservoir at ground level toanother reservoir at a height H, through a vertical pipe of 0.2m diameter.

Determining the approximate water temperature : Water flows at a velocity uoo = 1 m/s over a flat plate of length L = 0.6 m. Consider two cases, one for which the water temperature is approximately 300 K and the other for an approximate water temperature of 350 K. In the laminar and turbulent r..

Metallurgical engineer : A metallurgical engineer decides to set aside money for his newborn daughter's college education.

User Account

All Pages