Tank that is initially evacuated is connected by a valve to

Assignment Help Mechanical Engineering

Reference no: EM13624844

Tank that is initially evacuated is connected by a valve to an air supply line flowing air at 20 degree C, 800 kPa. The valve is opened, and air flows into the tank until the pressure reaches 600 kPa. Determine the final temperature and mass inside the tank, assuming the process is adiabatic. Develop an expression for the relation between the line temperature and the final temperature using constant specific heats.

Reference no: EM13624844

Questions Cloud

Sketch the steady-state temperature and heat flux : a composite rod consists of two different materials a and b each of length 0.5 l. the thermal conductivity of material

Steam flows steadily into a turbine with a mass flow rate : steam flows steadily into a turbine with a mass flow rate of 26 kgs and a negligible velocity at 6 mpa and 600 c. the

Sunlight strikes the surface of a lake a diver sees the : sunlight strikes the surface of a lake. a diver sees the sun at an angle of 28.4deg with respect to the vertical. what

What is the volume occupied by the water vapor what is the : a frictionless piston-cylinder is filled with 3 liters of water at 250 kpa. initially the temperature of the water is

Tank that is initially evacuated is connected by a valve to : tank that is initially evacuated is connected by a valve to an air supply line flowing air at 20 degree c 800 kpa. the

A ray of light in the coating is incident on the : a glass lens has a scratch-resistant plastic coating on it. the speed of light in the glass is 0.670c and the speed of

For a particular card game a standard deck of cards has all : for a particular card game a standard deck of cards has all of the aces kings queens and jacks removed. among the 36

An evacuated 150-l tank is connected to a line flowing air : an evacuated 150-l tank is connected to a line flowing air at room temperature 25 degree c and 8 mpa pressure. the

Draw the equipment and show the changes from the starting : saturated liquid ammonia is compressed adiabatically in a pistoncylinder. the ammonia starts at 40f and the

User Account

All Pages