Survive for finite life or infinite life

Assignment Help Physics
Reference no: EM131712616

A shaft is supported in ball bearings at A and E and loaded by a nonrotating force of 10 kN at the mid-span, C. All dimensions including the diameters of the shafts are in mm. Assume that the shaft has the ultimate tensile strength Sut = 550 N/mm2 and the endurance limit Se' = 0.5×Sut. The fraction, f, of Sut is 0.8. The stress concentration factor Kt = 1.72 and the notch sensitivity factor q=0.9. The modification factors of surface and size are ka = 0.85 and kb=0.84 respectively. First, determine whether the shaft will survive for finite life or infinite life. Also, estimate the life of the shaft.

Reference no: EM131712616

Questions Cloud

Interaction with the ground : A rubber ball with a mass of 0.58 kg is released for rest from a height of 8 meters above the ground. Due to the interaction with the ground
Determine standard deviations of the battery lifespans : Explain why you would also like to know the standard deviations of the battery lifespans before deciding which brand to buy.
Discuss supervising or being supervised : Data was collected from five members and asked the most common challenges related to supervising or being supervised
Fukushima powerplant accident : Two of the isotopes closely monitored among Pacific ocean marine life in the fallout from the Fukushima powerplant accident are Cs-134 and Cs-137.
Survive for finite life or infinite life : First, determine whether the shaft will survive for finite life or infinite life. Also, estimate the life of the shaft.
Define elaborate on the reasons behind the issues : discuss specific nutrients that may be of concern during this particular life cycle and elaborate on the reasons behind the issues
Calculate the weights of all the animals : Cattle. The Virginia Cooperative Extension reports that the mean weight of yearling Angus steers is 1152 pounds. Suppose that weights of all such animals.
What is the work done on the block : Three forces are exerted on a 6.00-kg block initially at rest on a horizontal slippery surface xy: a 100-N force directed along the positive x axis
Prepare work breakdown structure including number component : Prepare a work breakdown structure including numbered components. Submit your WBS by creating a table inside your assignment.

Reviews

Write a Review

Physics Questions & Answers

  Determine the velocity of the second log

The lumberjack runs to the other end of the log, attaining a velocity of +4.74 m/s relative to the shore, and then hops onto an identical floating log that is initially at rest. Neglect any friction and resistance between the logs and the water. W..

  What is the magnitude of the tangential force

The upper surface of a cube of gelatin, 5.0 cm on a side, is displaced 0.64 cm by a tangential force. what is the magnitude of the tangential force

  A baseball is thrown horizontally from from a height

A baseball is thrown horizontally from from a height of 44.10 mabove ground with a speed of 33.5 m/s. Where is the ballafter 3.00 s have elapsed?

  Compute the force exerted by one on the other

Two circular disks, each of area 1.90E-4 m2, are situated parallel to one another. The distance between them is small compared with their radii, Compute the force exerted by one on the other

  Find what is the sound intensity level in decibels

A certain sound has an intensity of 2.0647×103 W/m2. What is the sound intensity level in decibels

  Fixed to diagonally opposite corners of a square

Two identical point charges are fixed to diagonally oppositecorners of a square that is 0.500 m on a side. Each charge is +3.0x 10-6C. How much work is done by the electric force as one of the charges moves to an empty corner?

  What is the magnitude of the net change in entropy

A heat engine operates between a high-temperature reservoir at670K and a low-temperature reservoir at 320 K. What is the magnitude of the net change in entropy as a result of this cycle

  Question1an old oaken buck of mass 675 kg hangs in a well

question1an old oaken buck of mass 6.75 kg hangs in a well at the end of a rope. the rope passes over a frictionless

  Minima bracketing the central maximum

A rectangular aperture is to be placed in the center of the beam so that the light falls perpendicularly on a wall 4.50 m away, the central maximum fills a rectangle 110 mm wide and 6 mm high. The dimensions are measured between the minima bracket..

  What power must the motor deliver at a instantaneous speed

An elevator has a mass of 1170kg and carries a maximum load of 786 kg. A constant frictionalforce of 4260 N retards its motion upward. The accelerationof gravity is 9.8 m/s2.

  Two firecrackers explode at the same place in a laboratory

Two firecrackers explode at the same place in a laboratory and are separated by a time of 3 years as measured on the laboratory clock. What is the spatial distance between these two events in a rocket frame in which the events are separated in time..

  Assume all temperatures to be exact and neglect significant

Assume all temperatures to be exact, and neglect significant figures for small changes in dimension. Concrete highway slabs are poured in lengths of 9.00m. How wide should the expansion gaps between the slabs be at a temperature of 15degreeC to ensur..

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd