Suitable face width based on an allowable bending stress

Assignment Help Mechanical Engineering

Reference no: EM13718942

A steel spur gear has a module of 1 mm and 16 teeth cut on the 20° full-depth system and is to carry 0.15 kW at 400 rev/min. Determine a suitable face width based on an allowable bending stress of 150 MPa. Use the first approximation equation for bending stress, not the AGMA equations.

Reference no: EM13718942

Questions Cloud

Determine the percent change in thermal efficiency : A gas within a piston-cylinder assembly executes a Carnot power cycle during which the isothermal expansion occurs at TH = 600 K and the isothermal compressions occurs at TC = 300 K.

Determine the temperature distribution in the sphere : A medical investigator is proposing to use radioactive spheres for thermal ablation of tumors. The idea is that the radioactivity will generate heat at a constant, uniform rate, G (J m-3 s-1), that will raise the temperature of the sphere relative to..

Determine the torque required to run the pump : A hydraulic pump has displacement of 3 in^3 and a mechanical efficiency of 0.92. The flow output of the pump is 21 gpm, and the pressure at the outlet is 1250 psi. Determine the torque required to run the pump at 1800 rpm.

Use the first approximation equation for contact stress : A gear set has a module of 5mm, a 20° pressure angle, and a 24-tooth case-iron spur pinion driving a 48-tooth case-iron gear. The pinion is to rotate at 50 rev/min. What horsepower input can be used with this gear set if the contact stress is limited..

Suitable face width based on an allowable bending stress : A steel spur gear has a module of 1 mm and 16 teeth cut on the 20° full-depth system and is to carry 0.15 kW at 400 rev/min. Determine a suitable face width based on an allowable bending stress of 150 MPa. Use the first approximation equation for ben..

Compute the modulus of elasticity for the nonporous material : The modulus of elasticity for a ceramic material having 5 vol% porosity is 296 GPa (43x10^6 psi). (a) Compute the modulus of elasticity for the nonporous material. (b) At what volume percent porosity will the modulus of elasticity be 231 GPa (33x10^6..

Determine the isentropic compressor efficiency : An air compressor operates under steady conditions. Air is compressed from an initial state of 295 K and 101 kPa to a final state of 430 K and 340 kPa. Ignore heat transfer between the compressor and surroundings and ignore kinetic energy and potenti..

Calculate the turbines isentropic efficiency : Water vapour enters an adiabatic turbine at a flow rate of 820 L/s. The turbine expands the water from 10 MPa and 600oC to 8 kPa and a quality of 0.9. Kinetic energy and potential energy effects can be ignored.

What is the rate of work if isentropic efficiency : A turbine receives 10 kg/s of steam at a state of p1 = 5 bar, t1 = 400?c and exhausts to a pressure of p2 = 1.5 bar. The ambient temperature is t0 = 300c and the ambient pressure is p0 = 1 bar. What is the rate of work if isentropic efficiency is 75%..

User Account

All Pages