Suddenly exposed to an air stream at a temperature

Assignment Help Mechanical Engineering

Reference no: EM13714226

A long copper wire, 0.8 cm in diameter, is suddenly exposed to an air stream at a temperature of T? = 37°C. The thermal conductivity of the wire is k = 400 W/(m*K), the density is ? = 8900 kg/m3, and the heat capacity is cp= 385 J/(kg*K). If the convection coefficient is 50 W/(m2*K), long does it take for the wire to heat from 280K to 297K?

Reference no: EM13714226

Questions Cloud

What is the amplitude of the motion of this object : The x component of the velocity of an object vibrating along the x-axis obeys the equation Vx(t) = (0.445 m/s) sin [(25.4 rad/s) t + 0.223]. What is the amplitude of the motion of this object

Hypersonic gun tunnel is used to generate short-duration : A hypersonic gun tunnel is used to generate short-duration, high-speed flows and typically consists of two cylindrical volumes separated by a diaphragm. One end of the tunnel (the driver end) is pumped to a high pressure, while the other end (the dri..

How its time period will be affected : If you increase the length of a spring by the factor of 4, how its time period will be affected

What is the maximum acceleration of the needle : A sewing machine needle moves up and down in simple harmonic motion with amplitude of 1.27 cm and frequency of 2.55 Hz. What is the maximum acceleration of the needle

Suddenly exposed to an air stream at a temperature : A long copper wire, 0.8 cm in diameter, is suddenly exposed to an air stream at a temperature of T? = 37°C. The thermal conductivity of the wire is k = 400 W/(m*K), the density is ? = 8900 kg/m3, and the heat capacity is cp= 385 J/(kg*K). If the conv..

What is the kinetic energy of the block : A 1.2 kg block is initially at rest on a horizontal frictionless surface when a horizontal force in the positive direction of an x axis is applied to the block. What is the kinetic energy of the block

Determine the isentropic efficiency for this process : A piston cylinder holds air at 80 F and 15 psi. During an adiabatic process the pressure is increased to 165 psi and the entropy generated is 0.15 BTU/lb-R. Determine the isentropic efficiency for this process.

What horsepower motor is required to drive the pump : Number 3 fuel oil (30 API) is transferred from a storage tank at 60 deg F to a feed tank in a power plant at a rate of 2000 bbl/day. Both tanks are open to the atmosphere and they are connected by a pipeline containing 1200 ft equivalent length of 1...

Determine the turbine efficiency : Steam enters an adiabatic turbine at 1 MPa, 500 C and exits at 10 kPa. During this process, entropy is generated at 0. kJ/kg-K. Determine the Turbine Efficiency.

User Account

All Pages