Stretched in tension applied parallel

Assignment Help Mechanical Engineering
Reference no: EM13887195

Consider an aluminum single crystal that has been stretched in tension applied parallel to = [100] (σ = +250 kPa) and compressed parallel to = [010] (σ y = -50 kPa), with σ z  = 0, where = [001]. Assume that slip occurred on the (111) in the [110] direction and only on that slip system. Also assume that the strains are small.

A. Calculate the ratios of resulting strain, εyand εzx .

B. If the crystal were strained until εx = 0.0100, what would the angle be between the tensile axis and [100]?

Reference no: EM13887195

Questions Cloud

Determine number of independent slip systems : Determine the number of independent slip systems for crystals with each of the following combinations of slip systems. (The simplest way to do this is to de- termine how many of the strains ε1, ε2, γ 23, γ 31, and γ 12 can be independently imposed ..
Explain the purpose of commercial bank regulation : Is the purpose of commercial bank regulation to prevent bank failures? Explain.
Crystal subjected to uniaxial compression : NaCl crystals slip on {110} slip systems. There are six systems of this type. Consider a crystal subjected to uniaxial compression parallel to z = [110].
Why did deloitte take flanagans actions so seriously : Why did Deloitte take Flanagan's actions so seriously? What do you think might have led Flanagan to make such poor professional and ethical decisions?
Stretched in tension applied parallel : Consider an aluminum single crystal that has been stretched in tension applied parallel to x = [100] (σ x = +250 kPa) and compressed parallel to y = [010] (σ y = -50 kPa), with σ z  = 0, where z = [001]. Assume that slip occurred on the (111) in the..
Probability distribution shows the company''s monthly demand : 1.The demand for Carolina Industries product varies greatly from month to month. Based on the past two years of data, the following probability distribution shows the company's monthly demand:
Grown in the shape of a tensile bar : A single crystal of aluminum was grown in the shape of a tensile bar with the [321] direction aligned with the tensile axis. A. Sketch a standard cubic projection with [100] at the center and [001] at the North Pole and locate the [321] direction o..
When are quasi-experimental studies appropriate : Which of the following independent variables are appropriate for a quasi- experimental design and why?
Define nominal exchange rate and real exchange rate : Define nominal exchange rate and real exchange rate

Reviews

Write a Review

Mechanical Engineering Questions & Answers

  Determine the power required at steady state in hp to heat

a building for which the heat transfer rate through the walls and roof is 1400 btuh per degree temperature difference

  Two rods made of copper and steel are positioned between

two rods made of copper and steel are positioned between two rigid walls as shown. calculate the force in the rods if

  The valve connecting the tanks is opened and the gas

two tanks containing air are connected via a valve. the first tank is 0.5 m3 and contains air at t 25 oc and p 500

  Water at 20 bar 400degc enters a turbine operating at

water at 20 bar 400degc enters a turbine operating at steady state and exits at 1.5 bar. stray heat transfer and

  Piston cylinder device contains nitrogen gas as the system

A piston cylinder device contains nitrogen gas as the system. Initially, the system is at 1.5MPa and 470 °C. It now undergoes an isobaric process until its temperature is 25°C. Determine the final pressure and the heat transfer, in kJ/kg, associated ..

  Calibrated vibrometer output indicates a velocity amplitude

the waveform from a mechanical vibration is sensed by a velocity-sensitive vibrometer. the oscilloscope trave indicates

  Find the velocity potential and the stagnation points

Considering the flow of a uniform stream of speed V in the x-direction, a source of strength Q at (-1,0) and sink of strength Q at (1,0). Find the velocity potential and the stagnation points

  Poly tropic coefficient and associated boundary work

A closed system contains 0.5 kg of nitrogen, initially at 150 KPa with a volume of 0.3 m^3. The system undergoes a poly tropic process resulting in the final state of 240 KPa and 100 C. Determine a) the poly tropic coefficient and b) the associated b..

  Saturated ammonia vapor leaves an evaporator at 10 f and 05

saturated ammonia vapor leaves an evaporator at 10 f and 0.5 lbms. the velocity must be less than 15 fts. what is the

  Calculate the angle between the wires

showing the two upward pulls of the rings on his hands, each of size 380N. Calculate the angle between the wires supporting the rings and the vertical.

  A motorist decreases the speed of an automobile at a

a motorist decreases the speed of an automobile at a constant rate from 45 to 30 mih over a distance of 750 ft along a

  What percentage of the water flow rate must be supplied as

air enters a counterflow cooling tower at a rate of 100 m3s at 30 degree c dbt and 40 relative humidity. air leaves at

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd