Steam enters a two-stage adiabatic turbine

Assignment Help Mechanical Engineering

Reference no: EM13720231

Steam enters a two-stage adiabatic turbine at 8 MPa and 550ºC (State 1) and is expanded to 2 MPa (State 2) in the first stage of expansion. This steam is reheated at constant pressure to 550ºC (State 3) before entering the second stage of expansion. Steam leaves the second turbine stage at 150 kPa (State 4). The power output of the two-stage turbine is 80 MW and isentropic efficiency of each turbine stage is 84%.

a) Calculate the mass flow rate (kg/s) through the two-stage turbine.

b) Determine the temperature (ºC) at the exit of each turbine.

c) Calculate the rate of entropy generation (kW/K) for the two-stage turbine.

d) Show the two-stage expansion process on T-s diagram. Label states, show property values, and indicate appropriate lines of constant pressure.

Reference no: EM13720231

Questions Cloud

Methods and purpose of maintaining records : Discuss the methods and purpose of maintaining records at a halfway house as if you were discussing it with your supervisor. How do these methods ensure ethical standards and protect client confidentiality?

Maximum pressure that can be used in the evaporator : A refrigerator in a kitchen at 20 degrees Celsius uses R-134a. The freezer is to be kept at -5 degrees Celsius or cooler. What is the maximum pressure that can be used in the evaporator? Why?

Gaseous mixture at this temperature and pressure : A flow of 90% CH4, 10% H2 is passed into a furnace at 900 K. Determine whether carbon forms if the total pressure is 1.2 atm, carefully justifying your answer. Calculate the composition ( expressed as a molar percentage) of the gaseous mixture at thi..

Simple friction drive consists of two disks : A simple friction drive consists of two disks A and B, respectively with diameters 6 cm and 10 cm. Initially, disk A has a clockwise angular velocity of 500 rpm and disk B is at rest. It is known that disk

Steam enters a two-stage adiabatic turbine : Steam enters a two-stage adiabatic turbine at 8 MPa and 550ºC (State 1) and is expanded to 2 MPa (State 2) in the first stage of expansion. This steam is reheated at constant pressure to 550ºC (State 3) before entering the second stage of expansion. ..

Define the logistics process identified for project : The second component of your course project is an update of your progress on the LIP project. Remember that you are expected to develop your project independently throughout the course, using the project description as a guide. At this time, you s..

Find the resonance frequency of given circuit : A series L-R-C circuit consists of a 262 Ω resistor, a 23.9 mH inductor, a 10.28 µF capacitor, and an AC source of amplitude 26 V and variable frequency. If the voltage source is set to 4.7 times the resonance frequency, the impedance of this circ..

Calculate the power required to maintain the heater surface : An electric heater in the form of a horizontal disk of 57 mm diameter is used to heat the bottom of a tank filled with engine oil at a temperature of 5 degrees Celsius. Calculate the power required to maintain the heater surface at 70 degrees C.

Identify and define the slope and the y-intercept : Find (specify) the best model to predict the occupancy rate of the hotel complex - identify and define the slope and the y-intercept and predict the occupancy based on location 0.65 miles from the ocean.

User Account

All Pages