Steam enters a turbine at 120 bars and 440 0c and expands

Assignment Help Mechanical Engineering
Reference no: EM13630324

Steam enters a turbine at 120 bars and 440 0C and expands to 1 bar. At the exit entropy is 0.650 kJ/kg. K, greater than at the inlet. The process is adiabatic and change in kinetic and potential energies may be neglected.

Determine the work done by the steam, in kJ/kg and Now, for the same initial conditions and the same final pressure the turbine is run without insulation. It is found that the entropy increase of the steam is now 0.600 kJ/kg. K, and that the heat transfer from the steam occurs to the environment, which is at 300 K. the entropy change the environment is 0.0850 kJ/K per kg of the steam. Determine the heat transfer and the work output for the steam turbine under this new conditions, in kJ/kg

Reference no: EM13630324

Questions Cloud

The working fluid at 23 degrees c rejects 100 kjmin as heat : the thermal efficiency of an internally reversible heat engine is 62 percent. the working fluid at 23 degrees c rejects
A close rigid tanks with a volume of 2 m3 contain hydrogen : a close rigid tanks with a volume of 2 m3 contain hydrogen gas initially at 320 k and 180 kpa. heat transfer from a
A cubic crystal with interatomic spacing of 024 nm is used : a cubic crystal with interatomic spacing of 0.24 nm is used to select gamma rays of energy 100 kev from a radioactive
The cop of the refrigerator is 240 and the power input is : a small household refrigerator is used to cool 20 liters of water initially at 22 degrees c. the cop of the
Steam enters a turbine at 120 bars and 440 0c and expands : steam enters a turbine at 120 bars and 440 0c and expands to 1 bar. at the exit entropy is 0.650 kjkg. k greater than
A sphere is placed in a uniform external electric field : a sphere is placed in a uniform external electric field. accurately draw the vector field lines for the situation when
The structure of a house is such that it loses heat at a : the structure of a house is such that it loses heat at a rate of 4825 kjh per degree celcius difference between the
If the mass flow rate of steam is 50 kgh determine the rate : geothermal steam is planned as an energy source for power generation. the steam enters and adiabatic exchanger at 2
I explain physically how one can use gausss law to find : i explain physically how one can use gausss law to find the electric field of a long infinite charged wire? ii now do

Reviews

Write a Review

Mechanical Engineering Questions & Answers

  Package design

Package Design Brief: Assume you are the packaging engineer for a large consumer products company. In this company, the Packaging Design Briefs are initiated by the marketing group and forwarded to the Package Engineering group.

  Mechanical engineering questions

Define dynamic viscosity, Determine the centroid, Pressure due to the height of liquid, Advantage of changing the liquid, Calculate the total moment about the hinge of the seal gate.

  Automatic control

DOF system and Find the differential equation describing the system

  Write a paper on boyle''s law

Write a paper on Boyle's law and describe Compression and Combustion stroke . Also explain Charles's law and illustrate SI engine and CI engine.

  Verify the law for parallelogram of forces

To Verify the law for parallelogram of forces, law for triangle of forces and law of polygon of forces. These laws are very useful to calculate unknown forces in very short time.

  Discharge pressure of the compressor

What is the discharge revised discharge pressure of the compressor.

  The Case for Global Accounting Standards

The role of IFRS in both developing and developed capital markets.

  Wind turbine

Wind turbines are becoming more and more common as a method of energy production, wind turbines by their very nature are dynamic and are subject to and create their own internal and external kinematics and kinetics.

  Advanced design methodologies

8 x product engineering and design review (week 2 – 12), ~3 pages per item which must contain a brief description of the product then delve into concepts such as materials selection, manufacturing methods, life cycle analysis, recyclability and overa..

  Design of absorption column and the cooler

Design of absorption column and the cooler. Process design of other units should be completed along with pipe sizes.

  Determine the maximum total bending moment

Determine maximum total bending moment (static plus dynamic) of the beam under steady-state conditions.

  Force of the water on the gate

Determine the magnitude of the horizontal and vertical components of the force of the water on the gate.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd