Steam enters a converging nozzle

Assignment Help Mechanical Engineering

Reference no: EM13701628

Steam enters a converging nozzle at 800 kPa and 280 C with negligible velocity. If the expansion is isentropic, what is the minimum pressure that can be reached in such a nozzle and what is the cross-sectional area at the nozzle throat at this pressure for a flow rate of 0.75 kg/2. Do not assume ideal gas behaviour.

Reference no: EM13701628

Questions Cloud

What speed should the wind tunnel be run : A 1/10th scale model of an airplane is to be tested in a wind tunnel that operates with air at a pressure of 20 atmospheres. The plane is expected to fly at a speed of 500 [km/hr]. (a) What speed should the wind tunnel be run? (b) If the drag measure..

Liquid in a tube varies with tube diameter : The capillary rise, h, of a liquid in a tube varies with tube diameter, d, gravity, g, fluid density, roe , surface tension, Y, and the contact angle, B. (a) Find the dimensionless form of this statement. (b) If h = 3 [cm] in a given experiment, what..

Determine the heat added to the cycle per kilogram : A closed gas turbine unit uses neon as the working fluid. There are two stages of compression with inter cooling from 480kPa and 290K to a maximum pressure of 2.75MPa with an intermediate pressure of 1149kPa. The regenerator has an effectiveness of 6..

Consider the addition of an afterburner to turbojet engine : Air at 22 kPa, 220K and 250 m/s enters a turbojet engine in flight at an altitude of 10,000m. The diffusor slows the air down to a very low speed relative to its inlet. The pressure ratio across the compressor is 12. The turbine inlet temperature is ..

Steam enters a converging nozzle : Steam enters a converging nozzle at 800 kPa and 280 C with negligible velocity. If the expansion is isentropic, what is the minimum pressure that can be reached in such a nozzle and what is the cross-sectional area at the nozzle throat at this pressu..

Fluid is moving between two plates the top plate : Fluid is moving between two plates the top plate is moving with a velocity V, the distance between the plates is h, and the flow is completely horizontal; select the appropriate boundary condition of the viscous flow.

Determine the magnitude of the acceleration of the van : The engine of the van produces a constant driving traction force F at the wheels as it ascends the slope at a constant velocity v, determine the magnitude of the acceleration of the van,in m/s^2 .when it passes point A and begins to travel on a level..

Find the amount of return air and outdoor air in cfm : A building has a calculated cooling load of 24 tons, of which 6 tons is latent load. The space is to be maintained at 72 F db and 50% relative humidity. 15% by volume of the air supplied to the space is outdoor air at 95 F db and 65% relative humidit..

The x-component of the velocity of plane : The velocity of plane B relative to plane A can be expressed in the following form vb/a = Mi+Nj M i is the x-component of the velocity of plane B relative to plane A. what is the value of M, in km/h ?

User Account

All Pages