Static pressure in moving fluid can be measured accurately

Assignment Help Mechanical Engineering

Reference no: EM13706786

In theory, the static pressure in moving fluid can be measured accurately when the measuring sensor moves with the fluid. Why is it necessary to have the sensor moving with the fluid?

Reference no: EM13706786

Questions Cloud

What happens if the sensor does not move with the fluid : The static pressure of a location inside moving fluid is measured by a measuring sensor. What happens if the sensor does not move with the fluid?

Thermocouples were made by using copper-constantan wires : During a lab demonstration, two thermocouples were made by using copper-constantan wires. The junction diameter of one thermocouple is 1 mm, while the other is 0.2 mm. Initially, both thermocouples were held in a constant-temperature environment and ..

Calculate the historical average return : 2)BASIC STOCK ANALYSIS a) For each stock calculate the historical average return, the volatility, both on a daily base and annualized, and the correlation amongst the four stocks. Explain how you calculate them. b) What is your first assessmen..

The adiabatic flame temperature : Calculate the adiabatic flame temperature attained when methane at 298k, is combusted (a) with oxygen in the molar ratio air/CH4 = 9.524. Assume that CO2 and H2O are the products of the combustion. The adiabatic flame temperature is that temperature ..

Static pressure in moving fluid can be measured accurately : In theory, the static pressure in moving fluid can be measured accurately when the measuring sensor moves with the fluid. Why is it necessary to have the sensor moving with the fluid?

Are the wall taps used to measure static pressure of air : In the wind tunnel experiment, four wall taps are used to measure pressure. Are those wall taps used to measure pressure of the air very close to the wall surface? What is the velocity of air close to the wall surface? Are the wall taps used to measu..

What is equilibrating forces : What is equilibrating forces as it relates to unintended consequences?

Increase the temperature of the products of the reaction : Calculate the adiabatic flame temperature attained when methane at 298k, is combusted (a) with oxygen in the molar ratio air/CH4 = 9.524. Assume that CO2 and H2O are the products of the combustion. The adiabatic flame temperature is that temperature ..

Determine enthalpy change for process and final fluid phase : Refrigerant - 12 as saturated vapor at 0.5 MPa is isentropically compressed by a compressor in a refrigeration plant to 0.9 MPa. Determine the enthalpy change for the process and the final fluid phase.

User Account

All Pages