State the mass fraction of fe2o3 in the original sample

Reference no: EM13228081

A sample weighing 3.099 g is a mixture of Fe2O3 (molar mass = 159.69) and Al2O3 (molar mass = 101.96). When heat and a stream of H2 gas is applied to the sample, the Fe2O3 reacts to form metallic Fe and H2O(g). The Al2O3 does not react. If the sample residue weighs 2.499 g, what is the mass fraction of Fe2O3 in the original sample?

Reference no: EM13228081

Questions Cloud

Find the mass flow rate in sec at inlet and mass flow rate : steam flows through a turbine one inlet and two exits with know condition at the steady state ( hints: h1=3231KJ/kg, h2=2812 KJ/kg , specific volume (v)= 0.0994 m^3/kg , at p= 30 bars,v=0.4045m^3/kg, at p=5 bars, no potential and kinetic energy ch..

Find the net heat transfer for the process for n : 100 kg of a certain gas is contained within a piston-cylinder assembly. the gas undergoes a processwhich the pressure volume relationship is (PV)^n = constant. The initial pressure is 6 bars, the initial volume is 0.2 cubic meters

Explain what is the ph of the buffer : A buffer solution is prepared by adding 0.125 mol of ammonium chloride to 500 mL of 0.500 M solution of ammonium. What is the pH of the buffer

What is the new current feeding the combined loads : A 150 KVAR capacitor is connected across the line in Problem 1. (a) Sketch and label the power triangle for the capacitor. (b) Sketch and label the power triangle for the combined loads (capacitor and motor).

State the mass fraction of fe2o3 in the original sample : When heat and a stream of H2 gas is applied to the sample, the Fe2O3 reacts to form metallic Fe and H2O(g). The Al2O3 does not react. If the sample residue weighs 2.499 g, what is the mass fraction of Fe2O3 in the original sample?

Find the rms current into the motor : A 450 kW motor operating 73% Power factor lagging is connected to a 120V(rms), 60Hz line. (a) Sketch and label the power triangle for the motor. (b) Find the rms current into the motor.

Explain methyl red-hcl and ammonia : For each of these three possible indicators, give an example of an analyte and a titrant which best suits its use. changes color when the solution is slightly acidic (methyl red-HCl and ammonia?)

Explain sodium acetate and hydrocloric acid : In ploystyrene beaker , we mixed 30 mL of 0.1 M sodium acetate and 15 mL of 0.1 M hydrocloric acid. we measured the PH ( in PH meter ) it was 4.86 and then we added 5 mL of 0.1 M NaOH to this buffer.

Find the mass of the saturated liquid and of saturated vapor : the saturated liquid and vapor mixture at t=300c and quality of 75%.the mixture occupies a volume of 0.05 m^3 (a) find the specific volume in m^3/kg (hints: vf= 0.0014 vg=0.02167m^3/kg at t =300c) (b) find the mass of the mixture in kg.

User Account

All Pages