State experimental density of nickel under normal conditions

Reference no: EM13506536

The atomic radius of nickel is 124 pm and the average atomic mass of nickel is 58.6934 amu. Calculate the density of nickel assuming a simple cubic, body-centered cubic, and face-centered cubic unit cell structures. Now, the experimental density of nickel under normal conditions of temperature and pressure is 8.908 cm^-3. Predict its crystal structure, and use the experimental density to obtain an experimentally-corrected atomic radius.

Reference no: EM13506536

Questions Cloud

How many jet skis did allyson sell during the year : Allyson Ashley makes jet skis. During the year, Allyson manufactured 54,000 jet skis. Finished goods inventory had the following units.

Estimate the frequency of its fundamental mode of vibration : A piano tuner stretches a steel piano wire with a tension of 800 N. The steel wire is 0.400 m long and has a mass of 3.00 g, What is the frequency of its fundamental mode of vibration

Explain the orbital-filling diagram for nitrogen : Show the orbital-filling diagram for (nitrogen). Stack the subshells in order of energy, with the lowest-energy subshell at the bottom and the highest-energy subshell at the top.

What is the impedance of the inductor : an inductor having a reactance of 25 Ohms and resistance R gives off heat at the rate of 16.0 watts when it carries a current 0.500 A (rms) what is the impedance of the inductor

State experimental density of nickel under normal conditions : the experimental density of nickel under normal conditions of temperature and pressure is 8.908 cm^-3. Predict its crystal structure, and use the experimental density to obtain an experimentally-corrected atomic radius.

Calculate how far apart are the interference fringes : Laser light of wavelength 633 nm is incident upon two narrow slits separated by 0.15 mm. how far apart are the interference fringes

Define temperature iron is in the bcc form and will dissolve : At this temperature iron is in the BCC form and will dissolve (interstitial) carbon up to about 0.001 wt%. If the criterion is that the carbon concentration equals 0.0002 wt% carbon at a depth of 100 microns, how long must the exposure be

Rexs overhead allocation method : How would you improve it? Calculate alternative rates that you would use and explain why you think it would help Rex. You should draw on information provided in Tables 1 to 4 to support your recommendation.

Explain how many milliliters of each solution should mixed : Given a buret filled with 0.13 M acetic acid and a second buret filled with 0.17 M sodium acetate, how many milliliters of each solution should be mixed together to produce 23.5 mL of a solution with a pH of 4.82

User Account

All Pages