User Account

All Pages

Standard or typical gantt chart scheduling for foundation

Assignment Help Civil Engineering
Reference no: EM132416311

What is standard or typical gantt chart scheduling for foundation/ground improvement works like cement grouting and vibro compaction for an approximate 55m by 65m lot dimension?

  1. Mobilization 2 days
  2. Soil Test 2 days
  3. Drilling/Injection/Backfill/Compaction works. 3 days
  4. Finishing 1 day
  5. Post Soil Test (to verify if increase in bearing capacity or desired stability achieved) 2 days

Reference no: EM132416311

Questions Cloud

Reinforced concrete footing foundation for a shed : Design a reinforced concrete footing foundation for a shed. In this shed, 4 numbers of 500mm square reinforced concrete columns transmit a design
Examples of systems engineering modeling techniques : Give some examples of systems engineering modeling techniques that are used to analyze product development and production efficiency.
What is the suitability and performance of fine grained soil : What is the suitability and performance of the fine grained soil (e.g. clay with high plasticity) for engineering purposes?
Evaluate the link between hpw and employee well-being : CIPD LEVEL 5 - Analyse the concept of HPW and Evaluate the link between HPW and employee well-being - Evaluate link between HPW and competitive advantage.
Standard or typical gantt chart scheduling for foundation : What is standard or typical gantt chart scheduling for foundation/ground improvement works like cement grouting and vibro compaction
What is the typical costing-pricing : What is the typical costing/pricing (material & labor) for the injection of polyurethane foam for the purpose of soil stabilization particularly for footing
What is the standard pricing or cost estimates for soil : What is the standard pricing or cost estimates for soil stabilization/ground improvement works particularly for Vibro compaction and Jet Grouting?
Determine the distances upstream from the ocean : If the discharge into the ocean from the estuary is q = 1.5 m3/s per meter width, determine the distances upstream from the ocean where the depth is equal to 6
Nitrates are groundwater contaminants derived : Nitrates are groundwater contaminants derived from fertilizer, septic tank seepage and other sewage, nitrate poisoning is particularly hazardous to infants

Reviews

Write a Review

Civil Engineering Questions & Answers

  Find the horizontal and vertical displacements

Take a horizontal edge dislocation with vertical displacement discontinuity to model the sill. Use Volterra's formula to determine the horizontal and vertical displacements at the earth's surface. Plot the displacements for a sill of length L loca..

  An equal-tangent crest vertical curve has a 50 mih design

an equal-tangent crest vertical curve has a 50 mih design speed. the initial grade is 3. the high point is at station

  Determine the shortest stopping distance for each moment

Test reveal that a normal driver takes about 0.75s before he can react to a situation to avoid a collision. It takes about 3 seconds for a drunk driver to do the same. If such drivers are traveling on a straight road

  Determine the required mass of block a so that when it is

Determine the required mass of block A so that when it is released from rest it moves the 5-kg block B a distance of .75m up along the smooth inclined plane in t=2s. Neglect the mass of the pulleys and cords.

  Find the reactions and draw the shear diagram

Find the reactions - draw the shear diagram and draw the moment diagram

  Determine the normal stress and shear stress acting

Determine the normal stress and shear stress acting on the inclined plane AB . Solve the problem using the method of equilibrium described in Sec. 9.1 .

  Find the maximum acceleration experienced by the cars

The roadway follows the equation (x^2/(60m)^2) + (y^2/ (40m) ^2) = 1 where x and y are in meters. Find the maximum acceleration experienced by the cars. Hint: begin by making a sketch of the ellipse.

  Determine the maximum load p that can be applied

The 25mm thick strut shown below is glued to the horizontal member along surface AB. The glue can resist a shear stress of 600 kPa before failing, and the horizontal member can resist a normal stress of 2000 kPa before a bearing failure occurs.

  Calculate the euler buckling load for a mild steel rod of

Calculate the Euler buckling load for a mild steel rod of length 5m and diameter 25mm when pinned at each end and axially loaded. If this rod is to be used again with an initially straight axis, determine the maximum permissible

  Find the destruction of exergy in four places

A new air conditioner using R-410a is used in heat pump mode. The high pressure is 2000 kPa and the low pressure is 400 kPa.

  Determine wet unit weight and dry unit weight-wet density

Given the following data for an undisturbed soil sample: Gs = 2.69, e = 0.65, water content = 10% Determine wet unit weight and dry unit weight, wet and dry density

  How to derive the stiffnes of the cantilevered bean

a cantilevered bean has a lenght of L, a cross section area of A, and a flecural rigidity of EI. The free end is free to rotate and displace due to bending. derive the stiffnes of the cantilevered bean. Assume small deformations.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

Submit Assignment

Academics

Major Subjects

Majors

Get In Touch

whatsapp: +1-415-670-9521

Phone: +1-415-670-9521

Email: [email protected]

TERMS & POLICIES

HELP & SUPPORT

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd