Spherical drop of water, A spherical drop of water has

Spherical drop of water

Reference no: EM13311069

A spherical drop of water has r=0.1mm . If the surface tension of water is 72 dynes/cm , calculate the pressure difference across the interface. Express your answer in dynes/cm^2 , atmospheres( 1 atm = 1.013 × 10^6 dynes/cm^2) , and psia (a atm = 14.7 psia) . Tip: theta=0 for perfect fluid spheres.

Reference no: EM13311069

Questions Cloud

Violations of the emergency medical treatment : Violations of the emergency medical treatment and active labor act include all of the following except:

Calculate the pressure in the gas and the oil phases : A gas bubble is confined in a capillary tube of internal diameter 0.0007 cm . Oil and water are present in either side of the gas bubble, thus forming an interface having theta(go) and theta(gw) of 35 and 15, respectively. The gas-oil and gas-water s..

Calculate the surface tension of the liquid : Two capillary tubes have radii of 1 mm and 0.5 mm respectively. They are placed in a liquid whose density is 0.80 g/cc and which completely wets the walls of the tube, i.e. theta=0 . The difference in height of capillary rise is 0.74 cm. Calculate th..

What is the irreducible water saturation of this core plug : A chalk core plug having a pore volume of 17.0307 cm3 is fully saturated with reservoir brine. A synthetic oil flood is conducted on this plug. It is found that 12.25 cm3 of reservoir brine was displaced from this plug by the synthetic oil. After rea..

Spherical drop of water : A spherical drop of water has r=0.1mm . If the surface tension of water is 72 dynes/cm , calculate the pressure difference across the interface. Express your answer in dynes/cm^2 , atmospheres( 1 atm = 1.013 × 10^6 dynes/cm^2) , and psia (a atm = 14...

Hat is the emission of sulfur : Consider a new 38 % efficient 600MW power plant burning 9000 BTU/lb coal containing 1 % sulfur. If the plant has a scrubber that is 80% efficient, then:

Pipe surface temperature and outer insulation surface : A 5-cm outside diameter steel pipe is covered with a 0.6-cm layer of one insulation (k = 0.17 W/m-°C) followed by a 2.5-cm layer of a second insulation (k = 0.048 W/m-°C). The pipe surface temperature, Tp, is 315 °C, and the outer insulation surface ..

Determine the capacity of the steam-generating : Water at 3.5 MPa and 400 K enters the steam generating unit of a power plant and leaves the unit as steam at 3.5 MPa and 1000 K. The water mass flow rate is 3.5 kg/s. Starting with the full expression for steady-state, steady flow conservation of ene..

Determine the mass flow rate of the water : An amusement park at the bottom of Niagara falls wants to install a water turbine to produce 100 kW power. Water (assume to be incompressible) would enter the pipeline leading to the turbine at 20 °C and 0.101325 MPa at the top of the falls,

User Account

All Pages