Spherical balloon-determine the final temperature

Assignment Help Mechanical Engineering

Reference no: EM13708096

A spherical balloon contains 2 kg of water at 200C, 500 kPa. The ballon material as elasticity such that the pressure inside is always proportional to the balloon diameter. The water is now allowed to cool until the volume is one-held the initial volume. (a) Determine the final temperature (b) Calculate the work for the process, considering the water as the system.

Reference no: EM13708096

Questions Cloud

Temperature difference between the hot and cold streams : A vortex tube is used to separate an ideal gas at 10 bar and 375 K such that half the gas is collected in a cool stream at 1 bar and 255 K and the other half becomes a hot stream at 1 bar and 495 K. Assuming the process is adiabatic: is this process ..

Determine the appropriate line size : Linseed oil is to be pumped at a flow rate of 12gpm over a distance of 18m. The allowable pressure drop is 15 psi. Centrifugally spun cast iron is to be used as a pipe material. Determine the appropriate line size.

Difference between stagnation and static pressure : Pressure taps in a low speed wind tunnel reveal the difference between stagnation and static pressure to be .5 psi. Calculate the test section air velocity under the assumption that the air density remains constant at .0765 lbm/ft^3

Cylinder with a piston restrained by linear spring contains : A cylinder with a piston restrained by a linear spring contains 2kg of carbon dioxide at 500 kPa, 400 C the system is now cooled to 40C, at which point the pressure is 300 kPa. You may assume ideal gas behavior with constant specific heat value Cv=0...

Spherical balloon-determine the final temperature : A spherical balloon contains 2 kg of water at 200C, 500 kPa. The ballon material as elasticity such that the pressure inside is always proportional to the balloon diameter. The water is now allowed to cool until the volume is one-held the initial vol..

Piston-cylinder assembly which initially has a volume : A piston-cylinder assembly which initially has a volume of 1 m^3 is filled with 0.7 kg of air. The pressure on the air is always maintained at 1.2 bars. Heat transfer is allowed to take place until the volume is 60 percent of the initial value. You m..

Cylinder fitted with a piston containing : A cylinder fitted with a piston containing 1 kg of refrigerant 134a at 20C and 90% vapor quality is attached to a line flowing refrigerant 134a. The total restraining force on the piston is proportional to the cylinder volume squared. The valve is no..

What is the initial rate of mass loss through the cylinder : Helium gas is stored at 100*C under a pressure of 5x10^5 Pa in a glass cylinder 20 cm in diameter and 15cm long. The glass walls are 5 mm thick. Overtime the Helium will gradually diffuse out of the cylinder. What is the initial rate of mass loss thr..

Determine the magnitude of the principal stresses at point : The maximum shear strain at a point in a thin elastic plate is given as gamma (max) = 450(mu). it is also known that the sum of the normal stresses on two perpendicular planes passing through the point is 30 mpa. Determine the magnitude of the princi..

User Account

All Pages