Sketch the output signal waveform

Reference no: EM131019942

Give a circuit, complete with component values, for a weighted summer that shifts the dc level of a sine-wave signal of 3 sin(ωt) V from zero to -3 V. Assume that in addition to the sine-wave signal you have a dc reference voltage of 1.5 V available. Sketch the output signal waveform.

Reference no: EM131019942

Questions Cloud

Calculate the number of photons per cubic meter : Calculate the number of photons per cubic meter at the following temperatures: 300 K; 1500 K (a typical kiln); 2.73 K (the cosmic background radiation )

Implement designs for the closed-loop gains : Given an ideal op amp to implement designs for the following closed-loop gains, what values of resistors (R1, R2) should be used? Where possible, use at least one 10-kΩ resistor as the smallest resistor in your design.

Difference between two signals : In an instrumentation system, there is a need to take the difference between two signals, one of v1 = 2sin(2π × 60t) + 0.01 sin(2π × 1000t) volts and another of v2 = 2sin(2π ×60t)-0.01 sin(2π ×1000t) volts.

Problem regarding the ideal op amps and resistors : Use two ideal op amps and resistors to implement the Vo = v1 +2v2 - 3v3 - 5v4 In each case find the input resistance seen by each of the signal sources supplying v1, v2, v3, and v4.

Sketch the output signal waveform : Give a circuit, complete with component values, for a weighted summer that shifts the dc level of a sine-wave signal of 3 sin(ωt) V from zero to -3 V. Assume that in addition to the sine-wave signal you have a dc reference voltage of 1.5 V availabl..

Determining the resistors and a feedback resistor : A weighted summer circuit using an ideal op amp has three inputs using 10-kΩ resistors and a feedback resistor of 50 kΩ. A signal v1 is connected to two of the inputs while a signal v2 is connected to the third. Express vO in terms of v1 and v2. If v..

Write the equation of the line which has y-intercept : 1. Write the equation of the line which has y-intercept (0, 5) and is perpendicular to the line with equation y = -3x + 1. Write the equation of the line passing through (-3, -5) and (3, 0).

Find the coldest and hottest points on the plate : A thin plate occupies the region x2/4 + y2/9 is less than or equal to 1. If the temerature of the plate is T(x,y)= x2 + y2 - 5y + 5, find the coldest and hottest points on the plate.

Compute the pressure exerted by the radiation inside a kiln : Use the formula P = -(∂U/∂V) s,n,to show that the pressure of a photon gas is 1/3 times the energy density (UIV). Compute the pressure exerted by the radiation inside a kiln at 1500 K, and compare to the ordinary gas pressure exerted by the air.

User Account

All Pages