Sketch the nyquist plot of the system

Assignment Help Basic Computer Science

Reference no: EM131129716

In one mode of operation, the autopilot of a jet transport is used to control altitude. For the purpose of designing the altitude portion of the autopilot loop, only the long-period airplane dynamics are important. The linearized relationship between altitude and elevator angle for the long-period dynamics is

The autopilot receives from the altimeter an electrical signal proportional to altitude. This signal is compared with a command signal (proportional to the altitude selected by the pilot), and the difference provides an error signal. The error signal is processed through compensation, and the result is used to command the elevator actuators. A block diagram of this system is shown in Fig. 6.103. You have been given the task of designing the compensation. Begin by considering a proportional control law D(s) = K. (a) Use MATLAB to draw a Bode plot of the open-loop system for D(s) = K = 1.

(b) What value of K would provide a crossover frequency (i.e., where |G| = 1) of 0.16 rad/sec?

(d) What is the PM for this value of K?

(e) Sketch the Nyquist plot of the system, and locate carefully any points where the phase angle is 180° or the magnitude is unity.

(f) Use MATLAB to plot the root locus with respect to K, and locate the roots for your value of K from part (b).

(g) What steady-state error would result if the command was a step change in altitude of 1000 ft? For parts (h) and (i), assume a compensator of the form

(h) Choose the parameters K, T, and α so that the crossover frequency is 0.16 rad/sec and the PM is greater than 50°. Verify your design by superimposing a Bode plot of D(s)G(s)/K on top of the Bode plot you obtained for part (a), and measure the PM directly.

(i) Use MATLAB to plot the root locus with respect to K for the system, including the compensator you designed in part (h). Locate the roots for your value of K from part (h).

(j) Altitude autopilots also have a mode in which the rate of climb is sensed directly and commanded by the pilot.

(i) Sketch the block diagram for this mode.

(ii) Define the pertinent G(s).

(iii) Design D(s) so that the system has the same crossover frequency as the altitude hold mode and the PM is greater than 50°.

Reference no: EM131129716

Questions Cloud

Should provide an overview of the country : The United States or the country chosen for the group presentation should not be selected for this project. The first portion of this paper should provide an overview of the country (briefly) and of the current health issue affecting the country.

How much in resources does coffeeshop have to work with : How much in resources does CoffeeShop have to work with? How much does CoffeeShop owe creditors? How much of the company's assets do the CoffeeShop stockholders actually own?

What are the major characteristics of pure monopoly : What are the major characteristics of pure monopoly? What are the major barriers to entry that explain the existence of monopoly?

How current news story or event relates to an ethical issue : Search for a current (no more than two months old) news story (article, other piece of writing, or video clip) that examines an ethical issue touched on in the Module 7 readings or discussion. Alternatively, you may search for a current event that..

Sketch the nyquist plot of the system : Use MATLAB to plot the root locus with respect to K for the system, including the compensator you designed in part (h). Locate the roots for your value of K from part (h).

How can you improve efficiency and save money : What examples can you give of the second law of thermodynamics in your everyday life? How can you improve efficiency and save money?

Ethanol fires can be difficult to extinguish : Ethanol Fires can be difficult to extinguish. Discuss why this is true and what approach firefighters might use to fight this type of fire.

Discuss how and when the concept could be used by eec : Provide the definition of the concept. Discuss how and when the concept could be used by EEC. Discuss the advantages and disadvantages of the concept as it relates to EEC.

Why are asians in the us labeled a model minority : When and under what circumstances did the first large numbers of Asians arrive in the Americas according to the video by Loni Ding and the AAS 213 Asian American Brief Historical Chronology?

User Account

All Pages