Sketch clearly the velocity and shear stress profiles in

Reference no: EM13528833

A film of newtonian liquid folws down the outside surface of avertical cylinder of radius R. the flow is steady, laminar and the thickness of the film is constant.

(a) derive an equation for the velocity profile within thefilm in terms of radial distance r, measured from the cylinderaxis, the film thickness, δ, and the appropriate physicalpropertiesof the liquid. State clearly all assumptions made

(b) Sketch clearly the velocity and shear stress profiles inthe liquid film.

Reference no: EM13528833

Questions Cloud

Calculate the critical stressrequired for the propagation of : For a brittle material that has a specific surface energy of 0.26J/m2, and flexural strength and elastic modulus valuesof 76.6 MPa and 64 GPa, respectively, calculate the critical stressrequired for the propagation of a surface crack of length 0.05 m..

Estimate the theoretical fracture strength of a brittle : Estimate the theoretical fracture strength of a brittle material ifit is known that fracture occurs by the propagation of anelliptically shaped surface crack of length

Write the following iterated integral as a double integral : Write the following iterated integral as a double integral with aregion R, and use the change of variables to compute the integral:∫x=2x=0∫y=√(2x-x²)y=0√(x²+y²) dy dx

What is the nominal distance in miles between the sw corner : What is the nominal distance in miles between the SW corner ofSec. 2m T 6 S, R 5E, Indiam PM and the NW corner of Sec. 17, T 6 S,R 3 E, Indian PM?

Sketch clearly the velocity and shear stress profiles in : A film of newtonian liquid folws down the outside surface of avertical cylinder of radius R. the flow is steady, laminar and the thickness of the film is constant.

Determine the maximum fiber stress and the stress in a fiber : A simply supported beam, 2 inches wide by 4 inches high and 12 feetlong is subjected to a concentrated load of 2000 lb at a point 3 ftfrom one of the supports. Determine the maximum fiber stress and the stress in a fiber located 0.5 inches from the t..

Compute the elevations at 100-ft stations throughout the : A 800 m vertical curve joins a -3% grade line to a 5% grade line. The PVI of the curve is at station 6200 and its elevation is 600.6 ft. Compute the elevations at 100-ft stations throughout the curve.

Determine the torque needed to turn the impeller : A centrifugal pump is used to pump water from ariver. The absolute velocity V2 = 82ft/s is at an angle of 25 degrees to theradial direction. The impeller's thickness is of 1.2 in and r2= 0.86 ft and rotates at a speed of 1250 rpm.

What is the maximum pressure on the form in psf : What is the maximum pressure on the form in PSF?

User Account

All Pages