Already have an account? Get multiple benefits of using own account!
Login in your account..!
Remember me
Don't have an account? Create your account in less than a minutes,
Forgot password? how can I recover my password now!
Enter right registered email to receive password!
Project background:
The site is a land property with a frontage road. The land was sunieyed including level survey and the survey map has been prepared with contours as attached.
(Contour: Contour are lines on a map representing an imaginary line on the land surface connecting all the points of same elevation_ It is strongly advised to do some research though internet on what is contour, how to draw contours from level survey, how the level condition of ground surface is represented by contours map etc).
2 m x 2. m grids are drawn on the map, as graph, to work on the printed map.
A road, as a simple access to the property development, will be constructed Dil the land with the cross section geometry.- Width of carriage way 8 in- Cross fall 3%- Batter to existing surface with slope 1 in 2
The scope of works:- Set-up and draw vertical profile of proposed road centerline alignment- 4 cross-section profiles including start and end.- Calculation o f area of filling of cross section&- Calculation of volume of filling.
Hypothetically, upon leaving the filling station, tire pressure for each tire on the 18-wheeler was measured as 105 psi (gauge), and the wheel contact area with the ground was a 6.0 in by 7.0 in rectangle.
A 170 kg granite rock (ρ = 2700 kg/m 3 ) is dropped into a lake. A man dives in and tries to lift the rock. Determine how much force the man needs to apply to lift it from the bottom of the lake. Do you think he can do it?
An agronomist wants to measure the rainfall at the centroid of a plowed field between two roads. What are the coordinates of the point where the rain gauge should be placed?
Calculate the sensible portion of the humidification for steam injected into the airstream (BTU/hr). Moist air at 60ºF 20% RH enters a heater and humidifier
Determine the deflection at the mid span of a simple beam (wood joist) of a row house. The joist is designed as 2x12@16'' for DL = 12psf and LL=40 psf. The span length of the joist is 18'
compose a list here of the geological terms that you encounter in this reading that you could not define and explain in a test situation.
The plant treats 1.8MGD (million gallon per day). The water entering this unit has about 4500mg/L of coliforms, and the effluent target is 0.1 mg/L of coliforms.
Presedimentation can reduce the suspended solids concentration of raw river water from 500 mg/L to 200 mg/L. How many pounds of dry solids does this represent
Calculate the prismoidal correction and compare the prismoidal volume to the corrected end area volume. Station Left Center Right Area (sq. ft.) 1+00 C7.0/ C8.2/ C8.5/ 256.90 31.3 0.0 24.5 1+50 C5.3/ C5.0/ C3.5/ 207.62 29.5 0.0 21.8 2+00
The volume of the mold cavity forming the outside surface of the casting = 5000 cm3. What is the weight of the final casting? Ignore considerations of shrinkage.
What were the approaches and inquiries for the discourse framework on eParticipation and simulation exercise as conceptualized by the authors?
A stream conveying a flood peak of 50 m3/s (velocity 1.25 m/s and depth 1 m) is divided into 1 km long reaches for solution of the unsteady equations. Determine the largest value of ft for which the solution will be stable.
Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!
whatsapp: +1-415-670-9521
Phone: +1-415-670-9521
Email: [email protected]
All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd