Already have an account? Get multiple benefits of using own account!
Login in your account..!
Remember me
Don't have an account? Create your account in less than a minutes,
Forgot password? how can I recover my password now!
Enter right registered email to receive password!
Given a BCD decade counter with only the Q outputs available, show what decoding logic is required to decode each of the following states and how it should be connected to the counter . A HIGH output indication is required for each decoded state . The MSB is to the left. a. 0001 b. 0011 c. 0101 d. 0111 e. 1000
There are 5280 feet per mile. There are 3 feet in a yard. Use appropriate parameter passing and return mechanisms. Use appropriate datatypes. For example, with inputs of 1760 yards and 1320 ft, the result would be 1.25 miles.
A CB amplifier is operating with R load = 10 kiloohms, Rc = 10 kiloohms, and R signal = 100 ohms. At what current Ic should the transistor be biased for the input resistance Rin to equal that of the signal source
A 1.12 kg block is attached to a horizontal spring with spring constant 3500 N/m. The block is at rest on a frictionless surface. A 10 g bullet is fired into the block, in the face opposite the spring, and sticks.
Design an inverting amplifier using an ideal op-amp. the input resistance is 100kohms and the input voltage is 1V. A load resistor of 1kohms is connected to the output and must draw 5mW of power. find output voltage and current .
A variant of the binary symmetric communication channel is called a binary erasure channel. The transmitter sends a ‘0' or ‘1,' but at the receiver there are three possibilities: a ‘0' or ‘1' or ‘undecided bit (called erasure)' rec..
Let A be a Mealy machine. Which of the following transformations, if any, yield a Moore machine? Explain. 1) Adding a D flip-flop to each output (the outputs of the new flip-flops will be the new outputs of the machine).
A 60-Hz source supplies power to an industrial load through a transmission line of impedance (0.2+ j0.1) ohms. The load consumes 130 kW of power at line voltage VL= 440
Using a 500 Ohm resistance, design an RC low-pass filter that would attenuate a 120-Hz sinusoidal voltage by 20 dB with respect to the DC gain.
pecify the value for R. What is the diode current with the load connected What is the increase resulting in the output votage when the load is disconnected What change results if the load resistance is reduced to 100ohms? To 75ohms To 50ohms
A 240kW 500V 1750 r/min separately excited dc generator has an overall efiiciency of 94%. The shunt field resistance is 60 ohms and the rated current is 5A. The I^2 R loss in the armature is 0.023 pu.
Two charges are held fixed in an x-y plane. Charge Q=-1*10^-9 C is located at the origin, q=3*10^-9 C is located at (0,2). Determine the voltage (v_ba) between point 'b' located at (3,0) and point 'a' located at (1,0).
Write the VHDL ARCHITECTURE file for the Y(5) output only for a 8-to-1 demultiplexer. The inputs are D, the selects S0-S2, and the outputs Y(0)-Y(7). The select lines are BIT_VECTOR types, the data is BIT type and the outputs are BIT_VECTOR types.
Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!
whatsapp: +1-415-670-9521
Phone: +1-415-670-9521
Email: [email protected]
All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd