Show boat will eventually come to rest

Assignment Help Mechanical Engineering
Reference no: EM131383289

A boat of mass M is at rest in still water and a man of mass m is sitting at the bow. The man stands up, walks to the stern of the boat and then sits down again. If the water offers a resistance to the motion of the boat proportional to the velocity of the boat, show that the boat will eventually come to rest at its orginal position.

[This remarkable result is independent of the resistance constant and the details of the man's motion.]

Reference no: EM131383289

Questions Cloud

What frequencies are produced at its output : A transmitter operates with a carrier frequency of 7.2 MHz. It is amplitude modulated by two tones with frequencies of 1500 Hz and 3000 Hz. What frequencies are produced at its output?
Write a program which computes the amount tax to be paid : Write a program which computes the amount tax to be paid based on the following rule. The tax is:No tax if your income is less than or equal to $50,000 (inclusive).5% if the income is over $50,000 up to 75,000 (inclusive). 7% if the income is over &7..
Would it help if he juggles his balls while he crosses : The juggler wishes to cross a shaky bridge that cannot support the combined weight of the juggler and his balls. Would it help if he juggles his balls while he crosses?
Assessment of legislative roles : Given the readings this week, you now have an understanding of the legislative and judicial branches. Write a paper examining the roles of the legislative branch in health policy. Describe how this branch needs to relate to other stakeholders and ..
Show boat will eventually come to rest : If the water offers a resistance to the motion of the boat proportional to the velocity of the boat, show that the boat will eventually come to rest at its orginal position.
Risk manager for orlando radiology : You are the risk manager for Orlando Radiology. Your organization operates 10 medical imaging facilities throughout the Orlando, FL region. As the risk manager, you are responsible for safety, risk management, insurance programs, and workers' comp..
Find the rms voltage of the carrier without modulation : Find the RMS voltage of the carrier without modulation
Find the height to which the chain will first rise : When all the chain has landed on the table, the loose end is pulled upwards with the constant force 1/3 Mg. Find the height to which the chain will first rise.
What is a cash budget a flexible budget capex and opex : What is a cash budget, a flexible budget, CAPEX, and OPEX? How often do you use some form of budgeting? Why? If the business world is allowed to explain away their variances to budget, why is budgeting so important?

Reviews

Write a Review

Mechanical Engineering Questions & Answers

  Find the stiffness of each spring

Find the stiffness of each spring when a refrigerator unit having a mass of 30 kg is to be supported by three springs. The force transmitted to the supporting structure is only 10% of the impressed force. The refrigerator unit operates at 420 rpm.

  What is the diameter of the larger piston

a hydraulic system has a mechanical advantage of 4. If a smaller piston has a diameter of 5 inches what is the diameter of the larger piston?

  The adiabatic flame temperature

Calculate the adiabatic flame temperature attained when methane at 298k, is combusted (a) with oxygen in the molar ratio air/CH4 = 9.524. Assume that CO2 and H2O are the products of the combustion. The adiabatic flame temperature is that temperature ..

  Combustion with the theoretical amount of air

A sample of dried Appanoose County coal has a mass analysis of 71.1% carbon, 5.1% hydrogen (H), 9.0% oxygen (O), 1.4% nitrogen (N2), 5.8% sulfur, and the rest noncombustible ash. For complete combustion with the theoretical amount of air, determin..

  The pipe undergoes a 90 degree bend and exits out a

a pipe transports water in a 4-cm-diameter pipe with an average velocity of 10 ms. the pipe undergoes a 90 degree bend

  Fluid flow through a non-circular cross-section pipe

The pipe flow experiment deals with fluid flow through a non-circular cross-section “pipe”. Please explain, using supporting equations, HOW you would calculate the pressure loss during fluid flow between two points along the pipe.

  What is the maximum rate at which trilingual speaker speak

If he is speaking to D and S at the joint rate in part (b), can he also speak to F at some positive rate? If so, what is it? If not, why not?

  The flow rate 5 kgs determine the direction of flow and

a fluid flows through an adiabatic device. at one end the velocity is 30 ms h 320 kjkg and s 0.695 kjkg k and at the

  Determine the density and specific volume of carbon

determine the density and specific volume of carbon monoxide at a pressure 100 kpa and a temperature of 300 k. for co

  Calculate the value of k for each gear

A 24-tooth pinion cut with an 8-pitch, 20° full-depth hob drives a 56-tooth gear. Determine the outside radii so that the addendum circle of each gear passes through the interference point of the other. Calculate the value of k for each gear.

  What additional land would california require to meet

Use the USDA Quick Stats service (http://quickstats.nass.usda.gov//) to compare the 2009 oat yields between New York and California. What additional land would California require to meet the same amount of oat production as New York?

  Determine the modified coefficient of performance

Over time, dust accumulates on the refrigerator's con- denser coil, which is located behind the refrigerator, increasing the hot side resistance to Rh,d = 0.1 K/W. It is desired to have a refrigerator cooling rate of qin = 750 W. Using the results ..

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd