Shaft of a rolling machine is driven by means of a motor

Assignment Help Mechanical Engineering

Reference no: EM13704012

The shaft of a rolling machine is driven by means of a motor placed horizontally. The flywheel which also acts as a pulley is of 1.5 m diameter and has belt tension 5.4 kn and 1.8 kn on tight and slack side respectively. The weight of the flywheel is 20 kn. Determine the shaft diameter if the maximum allowable shear strength is 50 n/m^2 . The overhang of the flywheel is 250mm. The shaft is to operate with medium shock load condition and the values for shock and factors Cm = 2.0 and Ct = 1.5

Reference no: EM13704012

Questions Cloud

Average high and low temperatures in dayton oh : The average high and low temperatures in Dayton OH in September are about 77Fand 56F, respectively. What is the high temperature reported in (a) K, (b) C, and (c) R? What is the dismal temperature difference (delta T=21 F) when reported in (d) K, (e)..

What is the proportion of vehicles that will have to wait : At one of the entrances to the car parking area at the proposed new Mill project at Albion, a single line of vehicles approach a manually operated entry gate, where payment will be required to gain entry. The process of stopping at the payment ..

Natural uranium are split between enriched-depleted streams : The U-235 and U-238 masses in natural uranium are split between enriched and depleted streams as a result of an enrichment process. If the input masses and output enrichments are specified, mass conservation determines the maximum (i.e. zero-loss) qu..

A piston-cylinder filled with air receives : A piston-cylinder filled with air receives 10 kJ of heat and expands, doing 5 kJ of work. What is the change in internal energy of the air?

Shaft of a rolling machine is driven by means of a motor : The shaft of a rolling machine is driven by means of a motor placed horizontally. The flywheel which also acts as a pulley is of 1.5 m diameter and has belt tension 5.4 kn and 1.8 kn on tight and slack side respectively.

Milk of magnesia a suspension of mg(oh)2 in water : Milk of magnesia, a suspension of Mg(OH)2 in water, reacts with stomach acid (HCl) in a neutralization reaction.

Considering the maximum normal stress theory : A machine component of square cross- section is subjected to a direct tensile of 20 kn and a shear load of 10 kN. Considering the maximum normal stress theory and distortion energy theory of failure calculate the dimension of the component. Take fact..

No change compared to the actual valve : Using an Erlenmeyer flask with 2ml of water instead of 50ml, would it make the experimental molarity higher, lower or no change compared to the actual valve?

Total heat flow through the copper-fiberglass combination : One side of a copper block 5 cm thick is maintained at 250*C. The other side is covered with a layer of fiberglass 2.5 cm thick. the outside of the fiberglass is maintained at 35*C, & the total heat flow through the copper-fiberglass combination is 5..

User Account

All Pages