Rigid tank is divided into two equal parts by a partition

Assignment Help Mechanical Engineering

Reference no: EM13719899

A rigid tank is divided into two equal parts by a partition. One part of the tank contains 3.1 kg of compressed liquid at 400 kPa and 60 degrees Celcius while the other part is evacuated. The partition is now removed, and the water expands to fill the entire tank. Determine the entropy change of water during this process if the final pressure in the tank is 20 kPa.

Reference no: EM13719899

Questions Cloud

Explain the moment of inertia : You are given a disc of uniform density and need to design an experiment to determine its moment of inertia, I

Calculate the mass flow rate through the two-stage turbine : Steam enters a two-stage adiabatic turbine at 8 MPa and 550ºC (State 1) and is expanded to 2 MPa (State 2) in the first stage of expansion. This steam is reheated at constant pressure to 550ºC (State 3) before entering the second stage of expansion. ..

Hydrogen to be ideal gas with constant specific heats : Hydrogen gas at 35ºC and unknown pressure (State 1) enters a steady, insulated system which has no work interaction with the surroundings. Half of the gas exits at 2 bars and 90ºC (State 2) and the other half exits at 2 bar and -20ºC (State 3).

What is the rate of entropy generation within the turbine : Air at 5 bar and 177°C (State 1) is expanded through a turbine to 1 bar and 27°C (State 2). The mass flow rate of air through the turbine is 2 kg/s. Stray heat loss of 53.22 kW occurs to a surrounding at 27°C. Calculate the power (kW) developed by th..

Rigid tank is divided into two equal parts by a partition : A rigid tank is divided into two equal parts by a partition. One part of the tank contains 3.1 kg of compressed liquid at 400 kPa and 60 degrees Celcius while the other part is evacuated. The partition is now removed, and the water expands to fill th..

Multiplied by to give teh drag of the full-scale submarine : Consider a submarine cruising at 0.18 m/s far below the surface in sea water at 20 degree C. A 1:50-scale model of the submarine is to be tested in a towing tank. The tests are performed in fresh water at 20 degree C. At what speed should the model b..

Assuming no friction losses in the bend : A pipe transports water in a 4-cm-diameter pipe with an average velocity of 10 m/s. The pipe undergoes a 90 degree bend and exits out a 2-cm-diameter nozzle. Assuming no friction losses in the bend, the total force of teh water on the bend is nearest..

Piston-cylinder arrangement has a load on the piston : A piston/cylinder arrangement has a load on the piston so it maintains constant pressure. It intially contains 1kg of steam at 500kPa and 50% quality. Heat from a reservoir at 700 C brings the temperature of the steam to 600 C.

What changes about the waves patterns : On the water simulation, what does the crest (peak) of the wave look like in the top view? What does the trough look like, When you add two drips, what changes about the waves' patterns

User Account

All Pages