Reversible power cycle operating between the same reservoirs

Assignment Help Mechanical Engineering
Reference no: EM13714373

A power cycle receives 1120 Btu by heat transfer from a reservoir at 1080o F and discharges energy by heat transfer to a reservoir at 280 o F. The thermal efficiency of the cycle is 68% of that for a reversible power cycle operating between the same reservoirs. For the actual cycle, determine the thermal efficiency and energy discharged to the cold reservoir, in Btu (with sketch

Reference no: EM13714373

Questions Cloud

Find the maximum shear stress : Find the maximum shear stress in a 5 1/2 in-diameter circular saw blade if it runs idle at 5000 rev/min. The saw is 14 guage(0.0747 in) steel and is used on a 5/8 in-diameter. The thickness is uniform. What is the maximum radial component of stress?
Find the magnitude of the magnetic field inside the solenoid : A long solenoid consists of 1600 turns and has a length of 0.75 m. The current in the wire is 0.45 A. find the magnitude of the magnetic field inside the solenoid
What is the distance : Two parallel wires spaced a distance d apart experience an attractive force per unit length of 1.00e-4 N/m. what is the distance d
What is the distance : Two parallel wires spaced a distance d apart experience an attractive force per unit length of 1.00e-4 N/m. what is the distance d
Reversible power cycle operating between the same reservoirs : A power cycle receives 1120 Btu by heat transfer from a reservoir at 1080o F and discharges energy by heat transfer to a reservoir at 280 o F. The thermal efficiency of the cycle is 68% of that for a reversible power cycle operating between the same ..
Find the magnitude of the magnetic field at given distance : Assume that a lightning bolt can be represented by a long straight line of current. What is the magnitude of the magnetic field at a distance of 21.0 m from the bolt
Engine in outer space which operates on the carnot cycle : An inventor claims to have developed a refrigeration unit with a COP of 8.5 which maintains the refrigerated space at -10oC while operating in a room where the temperature is 25oC. Can this claim be correct?
Find the resistance of each resistor : Two resistors connected in series have an equivalent resistance of 825.7 ohm. Find the resistance of each resistor
What is the magnitude of the magnetic field : A long straight wire carries a current of 190 mA. What is the magnitude of the magnetic field 25 cm from the wire

Reviews

Write a Review

Mechanical Engineering Questions & Answers

  Discuss the similarities and differences between coulomb

discuss the similarities and differences between coulomb friction damping with the damper used in sdof

  A 50-mg railroad car moving with a velocity of 3 kmh is to

a 50-mg railroad car moving with a velocity of 3 kmh is to be coupled to a 30-mg cae which is at rest determinea the

  Determine the pressure p2 and p3 in pipes 2 and 3 under the

water flows through the horizontal y-fitting shown in figure p3.101. if the flowrate and pressure in pipe1 are q1 2.3

  A closed steel bottle contains carbon dioxide at -20c x20

a closed steel bottle contains carbon dioxide at -20c x20 and the volume is 0.05m3. it has a safety valve that opens at

  Estimate the mass of the gas in the tank in kg

Estimate the mass of the gas in the tank in kg assuming the gas behaves as an ideal gas. If the gas warms up to 35 deg C as it sits in the sun all day, what would the pressure rise to?

  What speed should the wind tunnel be run

A 1/10th scale model of an airplane is to be tested in a wind tunnel that operates with air at a pressure of 20 atmospheres. The plane is expected to fly at a speed of 500 [km/hr]. (a) What speed should the wind tunnel be run? (b) If the drag measure..

  The torque is found to have the same magnitude but in the

a force of f 1.00 7.00n is applied to an object that is pivoted about a fixed axis aligned along the z coordinate

  A power plant operates a regenerative rankine cycle

A power plant operates a regenerative Rankine cycle with a reheat, one closed and one open feedwater heater and has a net power output of 1.2 x 109 Btu/hr. When the steam exits the boiler it's temperature is 1000°F and its pressure is 1400psi...

  Neglect kinetic-potential energy changes-compressor power

Air is compressed at steady state from 100 kPa, 300 K, to 600 kPa, 440 K with a mass flow rate of 4 kg/s. Heat transfer occurs at a rate of 42.3 kJ/kg of air flowing to cooling water circulating in a water jacket enclosing the compressor.

  An electric arc considered as a black sphere

An electric arc considered as a black sphere of 5 mm diameter at a temperature of 5000 Celsius is situated 250 mm away from a metal dosk of 100 mm diameter. The disk is oriented at right angle to the normal to the arc and is open to radiation on both..

  The temperature is 68 f and the velocity is 40 fts the exit

a pump steadily draws water at a mass flow rate of 20 lbms through a piping arrangement. the pressure at the inlet is

  2103 v 40 v b c qv e0pr2d r qdvpe012 r 424 m 42 a

2103 v 40 v b c qv e0pr2d r qdvpe012 r 4.24 m 42 a parallel-plate air-gap capacitor has a capacitance of 0.14 f.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd