Reference no: EM13946723
Working in groups of two, our students design and perform experiments on forced convection phenom- ena using the general arrangement shown schemati- cally. The air box consists of two muffin fans, a plenum chamber, and flow straighteners discharging a nearly uniform airstream over the flat test-plate.The objectives of one experiment were to measure the heat transfer coefficient and to compare the results with standard convection correlations. The velocity of the airstream was measured using a thermistor- based anemometer, and thermocouples were used to determine the temperatures of the airstream and the test-plate.
With the airstream from the box fully stabilized at Too = 20°C, an aluminum plate was preheated in a convection oven and quickly mounted in the test plate holder. The subsequent temperature history of the plate was determined from thermocouple measurements, and histories obtained for airstream velocities of 3 and 9 m/s were fitted by the following polynomial:
The plate is square, 133 mm to a side, with a thickness of 3.2 mm, and is made from a highly polished aluminum alloy (p = 2770 kg/m3, c = 875 J/kg · K, k = 177 W/m · K).
(a) Determine the heat transfer coefficients for the two cases, assuming the plate behaves as a spacewise isothermal object.
(b) Evaluate the coefficients C and m for a correlation of the form NuL = C Rem Pr1/3 Compare this result with a standard flat-plate corre- lation. Comment on the goodness of the comparison and explain any differences.
|
Compute the local convection coefficient
: Compute the local convection coefficient at the leading and trailing edges of the heated plate with and without an unheated starting length of t = 1 m. Compute the average convection coefficient for the plate for the same conditions as part (a).
|
|
The process of strategic change management
: The purpose of this assignment is to provide learners with understanding and skills to assess the need for strategic change in organizations and how to empower them to take engagement actively in the process of strategic change management.
|
|
Compute width of the depletion region
: If a diode is constructed from doped silicon at concentrations on the N-side of 10^16 atoms/cm^3 and the P-side of 10^15 atoms/cm^3, compute its built-in potential and the width of the depletion region.
|
|
Define freedom and determinism
: Freedom and Determinism- Write a three-page analysis in which you need to: Define determinism, fatalism, and free will
|
|
Results with standard convection correlations
: The velocity of the airstream was measured using a thermistor- based anemometer, and thermocouples were used to determine the temperatures of the airstream and the test-plate.
|
|
Important mechanical properties of materials
: Scanning probe lithography Define intrinsic defects
|
|
Develop a low-pass rc filter
: Develop a low-pass RC filter to attenuate 0.5 MHz noise by 97%. Specify the critical frequency, values of R and C, and the attenuation of a 400-Hz input signal.
|
|
Discuss aristotle nicomachean ethics
: Include a general discussion with three core features (with at least one criticism) of Virtue Ethics. Discuss Aristotle's Nicomachean Ethics. Explain the Golden Mean. Discuss Confucian Moral Self-Cultivation
|
|
Advantages and three disadvantages for this business form
: There are seven forms of business: sole proprietorship, partnership, limited liability partnership, limited liability company (including the single member LLC), S Corporation, Franchise, and Corporation.
|