Resistance between the ends of the welded bar

Reference no: EM13561749

Two cylindrical bars, each with diameter of 2.40 cm, are welded together end-to-end. One of the original bars is copper and is 0.350 m long. The other bar is gold and is 0.135 m long. What is the resistance between the ends of the welded bar at 20 oC ?

Reference no: EM13561749

Questions Cloud

Capacitor that controls this pulsing rate discharges : In a heart pacemaker, a pulse is delivered to the heart 81 times per minute. The capacitor that controls this pulsing rate discharges through a resistance of 2.4 x 106. One pulse is delivered every time the fully charged capacitor loses 63.3% of its ..

How many time constants must elapse before a capacitor : How many time constants (a decimal number) must elapse before a capacitor in a series RC circuit is charged to 60.0% of its equilibrium charge?

Concept of beat frequency to tune a musical instrument : Explain how you might use the concept of beat frequency to tune a musical instrument using tuning forks. Would this method work better for an instrument that is slightly out of tune or an instrument that is completely out of tune?

How much work is done by the normal force : A factory worker pushes a 28.6 kg crate a distance of 4.9 m along a level floor at constant velocity by pushing downward at an angle of 32 degrees below the horizontal. The coefficient of kinetic friction between the crate and floor is 0.26. How m..

Resistance between the ends of the welded bar : Two cylindrical bars, each with diameter of 2.40 cm, are welded together end-to-end. One of the original bars is copper and is 0.350 m long. The other bar is gold and is 0.135 m long. What is the resistance between the ends of the welded bar at 20 oC..

Potential difference between plates-initial stored energy : The parallel plates in a capacitor, with a plate area of 5.80 cm2 and an air-filled separation of 4.90 mm, are charged by a 8.10 V battery. They are then disconnected from the battery and pulled apart (without discharge) to a separation of 6.70 mm..

What is the magnetic force on the section of wire : cA wire carries a steady current of 2.40 A. A straight section of the wire is 0.750 m long and lies along the x-axis within a uniform magnetic field, B=kT. If the current is in the +x direction, what is the magnetic force on the section of wire?

A guitar string-what is its mass per unit length : A guitar string, destined to be an upper E string, has length 98.00 cm and mass 0.460 g. What is its mass per unit length? What length of this string should be used on a guitar if the fundamental frequency is to be 330 Hz and its tension is to be 78...

Person wants to push a lamp across the floor : A person wants to push a lamp ( mass 7.2 ) across the floor, for which the coefficient of friction is 0.20. calculate the maximum height x above the floor at which the person can push the lamp so that it slides rather than tips.

User Account

All Pages