Realize the circuit using six d flip-flops

Assignment Help Electrical Engineering
Reference no: EM131368099

An older model Thunderbird car has three left (LA, LB, LC) and three right (RA, RB, RC) tail lights which flash in unique patterns to indicate left and right turns.

2085_6d3d335a-ac4f-45df-b3a7-8a42a1129e9a.png

Design a Moore sequential circuit to control these lights. The circuit has three inputs LEFT, RIGHT, and HAZ. LEFT and RIGHT come from the driver's turn signal switch and cannot be 1 at the same time. As indicated above, when LEFT = 1 the lights flash in a pattern LA on; LA and LB on; LA, LB, and LC on; all off; and then the sequence repeats. When RIGHT = 1, a similar sequence appears on lights RA, RB, and RC, as indicated on the right side of the picture. If a switch from LEFT to RIGHT (or vice versa) occurs in the middle of a flashing sequence, the circuit should immediately go to the IDLE (lights off) state and then start the new sequence. HAZ comes from the hazard switch, and when HAZ = 1, all six lights flash on and off in unison. HAZ takes precedence if LEFT or RIGHT is also on. Assume that a clock signal is available with a frequency equal to the desired flashing rate.

(a) Draw the state graph (eight states).

(b) Realize the circuit using six D flip-flops, and make a one-hot state assignment such that each flip-flop output drives one of the six lights directly. (You may use LogicAid.)

(c) Realize the circuit using three D flip-flops, using the guidelines from Section 1.7 to determine a suitable encoded state assignment. Note the tradeoff between more flip-flops and more gates in (b) and (c).

Reference no: EM131368099

Questions Cloud

Write complete vhdl code for the divider : A block diagram and state graph for a divider for unsigned binary numbers is shown below. This divider divides a 16-bit dividend by a 16-bit divisor to give a 16-bit quotient.
Wendy sells vending machines : She can sell 9 machines if she charges $1,000 per machine; 8 if she sells them at the price of $1,100 per machine; 7 at the price of $1,200 per machine, and 6 at the price of $1300 per machine. Each vending machine costs $500 to produce and bring ..
What currency or currencies does your mnc work with : What currency or currencies does your MNC work with? Discuss how exchange rates impact your MNC. How do each of the main economic agents in the macroeconomy impact your MNC?
Conclusion change for the winter months : How would you conclusion change for the winter months, if bad weather makes it likely for traffic jams on the highway to increase to 6 days per month?
Realize the circuit using six d flip-flops : Realize the circuit using three D flip-flops, using the guidelines from Section 1.7 to determine a suitable encoded state assignment. Note the tradeoff between more flip-flops and more gates in (b) and (c).
Why a currency devaluation whether intentional or not : Provide an overview of this case analysis; summarize the key points. Explain why a currency devaluation, whether intentional or not, would be a problem.
Different when the interest rate changes : (a) Calculate the present value of each payment option, assuming the interest rate is 12%. (b) Then, calculate the present values based on an interest rate of 5%. (c) Compare your answers and explain why they are different when the interest rate c..
Write vhdl code for the controller : Construct a state graph chart for the tape player controller. You may assume that only one of the four buttons can be pressed at any given time.
Personal and organization decisions : What is economics? What role does economics play in your personal and organization's decisions?

Reviews

Write a Review

Electrical Engineering Questions & Answers

  Write matlab program to generate first 30 fibonacci numbers

Fibonacci numbers are the numbers in a sequence in which the first two elements are 0 and 1 and the value of each subsequent element is the sum of the previous two elements. Write a MATLAB program that generates the first 30 Fibonacci numbers

  Calculate the velocity gradient at the wall

The gas temperature at the wall is equal to standard sea level temperature. At this point, calculate the velocity gradient at the wall normal to the wall.

  Explain the reason for the failure of spectral overlap

The coherent detector for the demodulation of DSB-SC fails to operate satisfactorily if the modulator experiences spectral overlap, explain the reason for this failure.

  Consider a silicon pn junction diode at room temperature

Consider a silicon pn junction diode at room temperature with: EG = 1.1 eV VBI = 950 meV ÷ = 4.0 eV

  Calculate the phase voltage and line voltage

A three 120 - V power line is Y-connected. The three phase outputs are marked as a,b,c. The neutral is marked as n. The phase sequence is abc. It is connected to a balanced Y- connected load, with the impedance is 12 + j 9 omega.

  Why needed the cd to control the medium access

In today's typical Ethernet, the stations are connected to anEthernet switch using twisted pairs. In this case, do we still needCSMA/CD to control the medium access Explain why.

  Determine corresponding trans-conductance amplifier model

Amplifier A has an input resistance of 1M Ω, an output resistance of 200Ω, and an open-circuit trans-resistance gain of 100MΩ. Amplifier B has an input resistance of 50Ω, an output impedance of 500 k Ω, and a short circuit current gain of 100. Fin..

  Determine efficiency of transformer for secondary current

A single-phase, 100-kVA, 1000:100-V, 60-Hz transformer has the following test results: Open-circuit test (FIV side open): 100 V, 6 A, 400 W Short-circuit test (LV side shorted): 50 V, 100 A, 1800 W 1)Determine the voltage regulation at 75% of the rat..

  Estimate the half-cell potentials of each of the electrodes

A combination of silver/silver chloride and cadmium electrodes are used for biomedical application. a.) Estimate the half-cell potentials of each of the electrodes assuming the potentials don't change between 25deg and body temp.

  Determine the maximum bit rate for an fsk

Determine the maximum bit rate for an FSK signal with a mark frequency of 48Khz, a space frequency of 52Khz, and an available bandwidth of 10kHz.

  Find the effective value of the voltage

Find the effective value of the voltage.

  Calculate the hole diffusion current density versus x

The total current in a semiconductor is constant and is composed of electron drift current and hole diffusion current. The electron concentration is constant and is equal to 10^17 cm^-3. The hole concentration is given by p(x)

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd