Ratio between longitudinal and lateral deformations

Assignment Help Mechanical Engineering
Reference no: EM13713274

At the proportional limit, a 30 mm wide × 12 mm thick bar elongates 2.0 mm under an axial load of 41.5 kN. The bar is 1.5-m long. If Poisson’s ratio (ratio between longitudinal and lateral deformations) is 0.33 for the material, determine:

(a) The modulus of elasticity.

(b) The proportional limit.

(c) The change in each lateral dimension.

Reference no: EM13713274

Questions Cloud

Atmospheric air can be modeled as ideal gas moisture : Atmospheric air can be modeled as ideal gas moisture at a temperature T0 and pressure P0. At a particular location the mole fractions are of the ideal gas components of the mixture are xoN2= 0.7567 xoH20= 0.0303 xoO2= 0.2035 xC02= 0.0003. Consider a ..
Is the deformation of the silicone case elastic or plastic : A women dropped dropped her iPhone 1,400-feet when taking a picture on a plane. A few days later it was returned to her by a stranger - and the best part is it still works. The iphone is covered by a silicone case as shown in the picture below.
Determine heat transferred through the reactor walls : Consider combustion of hydrogen in pure oxygen under constant pressure in a two-inlet and single-exit reactor. The reactants enter the reactor at temperature T1 = 200 K. The products leave the reactor at temperature T2 = 2000 K. No work is developed ..
Expand to fill the entire container at constant temperature : Determine the change in entropy for 1.0 mole of an ideal gas originally confined to one-half of a 5.0-L container when the gas is allowed to expand to fill the entire container at constant temperature.
Ratio between longitudinal and lateral deformations : At the proportional limit, a 30 mm wide × 12 mm thick bar elongates 2.0 mm under an axial load of 41.5 kN. The bar is 1.5-m long. If Poisson’s ratio (ratio between longitudinal and lateral deformations) is 0.33 for the material, determine:
Consider the classical adiabatic saturation process : Consider the classical adiabatic saturation process in which a stream of is mixed adiabatically and isobarically (T1)with a stream of liquid water in order (T2) to become a saturated air +water vapor mixture . Show that the adiabatic saturation tempe..
Transferred heat and the change in entropy : 1 kg of air is polytropically compressed reversibly from 5 bar to 10 bar from an initial temperature of 300oC. Find the transferred heat and the change in entropy. Take the polytropic index as 1.25.
Determine the final temperature and change in entropy : A tank with a fixed volume contains 1 kg of dry air at 200oC . If 200 kJ of heat is added to the tank determine the final temperature and change in entropy.
What is the magnitude of the force : You hang a book bag on a spring scale and place the bag on a platform scale so that the platform scale reads 23.7N. What is the magnitude of the force that Earth exerts on the bag.

Reviews

Write a Review

Mechanical Engineering Questions & Answers

  In order to have the machine deliver 100000 nmkg of air

air enters a machine at 373 k with a speed of 200 msec and leaves it at the temperature of the standard sea level

  Find the turbine efficiency using the air tables

Air enters a non-ideal gas turbine at T1 = 2290°F, P1 = 196 psia and exits at T2 = 1200°F, P2 = 14 psia. (a) Assuming constant specific heats evaluated at 1000F, find the turbine efficiency using the Air Tables.

  Determine a the final pressure and the quality if mixture b

a piston-cylinder device initially contains 0.15-kg of steam at 3.5 mpa superheated by 5degc. now the steam loses heat

  What is the optimal number of cases to have on hand to

a beer distributor incurs a penalty cost of 2 per case of shortage and a 1 charge per case left over in inventory at

  If the compressor consumes 400 w of power and the cop the

refrigerant-134a enters the evaporator coils placed at the back of the freezer section of a household refrigerator at

  What percentage of the engines will fail by 100000 miles at

hyundai advertises a 10 year-100000 mile power-train warranty for its cars. you work for a competitor and want to see

  Degree-of-freedom analysis and estimate the molar flow rate

A stream of humid air containing 1.00 mole % H2O(v) and the balance dry air is to be humidified to a water content of 10.0 mole % H2O. For this purpose, liquid water is fed through a flow meter and evaporated into the air stream. The flow meter readi..

  Estimate the concentration in ppm and the mass emission

estimate the concentration in ppm and the mass emission rate of nox in kghr expressed as no if a coal containing 1.5

  Derive shear modulus g or bulk modulus k of isotropic

derive shear modulus g or bulk modulus k of isotropic materials in terms of youngs modulus e and poissons ratio v. use

  What is the initial temperature and initial internal energy

suppose 2 kg of water at 300 kpa has a specific volume of 0 5m3kg. as a result of heating at constant pressure the

  Assume the density of air is 116 kgm3 and neglect the

balloons are often filled with helium gas because it weighs only about one-seventh of what air weighs under identical

  Determine the mass of the requested machinery fluid

An oil drilling operation has requested a machinery fluid F containing 86.0% lubricant, 8.0% corrosion control, and 6.0% detergent for its drilling rigs. You plan to produce the fluid by recycling two existing machinery products. Product A contains 9..

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd