Process determine the work transfer by the impellor

Reference no: EM13541392

0.5 kg of saturated vapor (H2O) at 1.5 bars is contained in a piston-cylinder device. Heat transfer in the amount of 150 kJ to the steam occurs and some work is done on the steam by a impellor. At the end of this process the steam is at 1.5 bars and 400 C. Assuming the pressure of the steam was constant throughout the process determine the work transfer by the impellor.

Reference no: EM13541392

Questions Cloud

What is the pull-in voltage-capacitance value : Two parallel plate capacitor plates have an area of 1 mm^2 and a spacing of 1 µm(air gap). One is fixed and another is suspended by a mechanical spring with a force constant of 1 N/m.

Capacitance value for two distances between electrode plates : A parallel-plate capacitor has an area of 100 x 100?m^2. Calculate the capacitance values for two distances between the electrode plates: 1 and 0.5 µm. The medium is air. If the bias (voltage) in (a) is 3V, what is the attractive force?

Process of a closed system-pressure of a gas changes : During an expansion process of a closed system, the pressure of a gas changes from 100 kPa to 400 kPa according to the following relation: P = a + bV Where “a” is a constant, “b” = 100 kPa/m3, and “V” is the volume of the system in meters cube. If th..

An insulated piston-cylinder device contains : An insulated piston-cylinder device contains 3 liters of saturated liquid water at a pressure of 150 kPa. A current of 10 Amps flows for 45 minutes through an electrical resistor that is placed in the water, while the water is stirred by a paddle-..

Process determine the work transfer by the impellor : 0.5 kg of saturated vapor (H2O) at 1.5 bars is contained in a piston-cylinder device. Heat transfer in the amount of 150 kJ to the steam occurs and some work is done on the steam by a impellor. At the end of this process the steam is at 1.5 bars and ..

The horizontal acceleration of a projectile : The horizontal acceleration of a projectile

The vertical velocity of a projectile : The vertical velocity of a projectile

Find the magnitude of the acceleration of the object : Two objects are connected by a string that passes over a frictionless pulley as shown in the figure. Assume the incline is frictionless and take m1=2.00kg, m2=6.00kg and theta=55.0 degrees. (a) Draw free-body diagrams of both objects (b) find the mag..

Find the electrostatic potential energy if all the charges : Four point charges of magnitude 3.1 µC are at the corners of a square of side 5 m. Find the electrostatic potential energy if all the charges are negative.

User Account

All Pages