Problem regarding the forward-bias region

Reference no: EM131019896

A pn junction operating in the forward-bias region with a current I of 1 mA is found to have a diffusion capacitance of 5 pF. What diffusion capacitance do you expect this junction to have at I = 0.1 mA? What is the mean transit time for this junction?

Reference no: EM131019896

Questions Cloud

What is the opportunity cost for jack for the production : Who has the absolute advantage in the production of shirts - what is the opportunity cost for Jack for the production of one unit of wheat?

Radiant power emitted from the opening : What is the temperature of the interior enclosure wall? If the interior surface is maintained at this temperature, but is now polished, what will be the value of the radiant power emitted from the opening?

Irradiation on a small test surface : If the inner surface is coated with carbon black and maintained at 600 K, what is the irradiation on a small test surface placed in the chamber? If the inner surface were not coated, but still maintained at 600 K, what would the irradiation be?

Problem regarding the electrical resistance elements : Consider a plate that is well insulated on its back side and maintained at 200°C by imbedded electrical resistance elements. The exposed surface has an emissive power of 1200 W/m2, irradiation of 2500 W/m2, and reflectivity of 30%. The exposed sur..

Problem regarding the forward-bias region : A pn junction operating in the forward-bias region with a current I of 1 mA is found to have a diffusion capacitance of 5 pF. What diffusion capacitance do you expect this junction to have at I = 0.1 mA? What is the mean transit time for this junc..

Temperature dependence of is : Assuming that the temperature dependence of IS arises mostly because IS is proportional to n2 i , use the expression for ni in Eq. (3.2) to determine the factor by which n2 i changes as T changes from 300 K to 305 K. This will be approximately the..

Estimate the total charge stored : Estimate the total charge stored in a 0.1-μm depletion layer on one side of a 10-μm×10-μm junction. The doping concentration on that side of the junction is 1018/cm3.

Determining the acceptor concentration : If, for a particular junction, the acceptor concentration is 1017/cm3 and the donor concentration is1016/cm3, find the junction built-in voltage. Assume ni = 1.5×1010/cm3.

Magnitude of charge stored on either side of junction : With the terminals left open, what is the width of the depletion region, and how far does it extend into the p and n regions? If the cross-sectional area of the junction is 20 μm2, find the magnitude of the charge stored on either side of the junct..

User Account

All Pages