Pressure and temperature of the air

Assignment Help Mechanical Engineering
Reference no: EM13949908

1. Steam at 550 lbf/in.2, 7008F enters an insulated turbine operating at steady state with a mass flow rate of 1 lb/s. A two-phase liquid-vapor mixture exits the turbine at 14.7 lbf/2 (d) the rate of entropy production, in kW/K, for an enlarged control volume that includes the pipe and enough of its immediate surroundings so that heat transfer from the control volume occurs at 300 K.

2. Air at 500 kPa, 500 K and a mass flow of 600 kg/h enters a pipe passing overhead in a factory space. At the pipe exit, the pressure and temperature of the air are 475 kPa and 450 K, respectively. Air can be modeled as an ideal gas with 5 1.39. Kinetic and potential energy effects can be ignored. Determine at steady state, (a) the rate of heat transfer, in kW, for a control volume comprising the pipe and its contents, and (b) the rate of entropy production, in kW/K, for an enlarged control volume that includes the pipe and enough of its surroundings that heat transfer occurs at the ambient temperature, 300 K.

Reference no: EM13949908

Questions Cloud

Kinetic and potential energy effects : Air enters a compressor operating at steady state at 1 bar, 228C with a volumetric flow rate of 1 m3/min and is compressed to 4 bar, 1778C. The power input is 3.5 kW. Employing the ideal gas model and ignoring kinetic and potential energy effects,..
Compressor operating at steady state : Refrigerant 134a at 30 lbf/in.2, 408F enters a compressor operating at steady state with a mass flow rate of 150 lb/h and exits as saturated vapor at 160 lbf/in.2 Heat transfer occurs from the compressor to its surroundings, which are at 408F. Cha..
Determine the long run fraction of time the mouse will spend : Make compartments 3 and 4 into absorbing states by assuming that the mouse must stay in those compartments once entered and write the new transition matrix.
Assume the stock has neither par nor stated value : Assume the stock has neither par nor stated value. Prepare journal entries to record this event, Assume the stock has an $7.0 stated value. Prepare journal entries to record this event.
Pressure and temperature of the air : Air at 500 kPa, 500 K and a mass flow of 600 kg/h enters a pipe passing overhead in a factory space. At the pipe exit, the pressure and temperature of the air are 475 kPa and 450 K, respectively. Air can be modeled as an ideal gas with k 5 1.39. K..
Absence of internal irreversibilities : There is no significant heat transfer between the engine and its surroundings, and kinetic and potential energy effects are negligible. For operation at steady state, determine the rate at which power is developed in the absence of internal irreve..
Age-dependent diseases and age-related diseases : Distinguish between age-dependent diseases and age-related diseases.
Find the irr of a project that returns : Find the IRR of a project that returns $17,000 three years from now if it costs $12,000.
Problem regarding the ideal gas model : At steady state, air at 200 kPa, 528C and a mass flow rate of 0.5 kg/s enters an insulated duct having differing inlet and exit cross-sectional areas. At the duct exit, the pressure of the air is 100 kPa, the velocity is 255 m/s, and the cross-sec..

Reviews

Write a Review

Mechanical Engineering Questions & Answers

  Determine the volume flow rate of the extraction flow

Steam at 3 MPa, 400C enters a turbine with a volume flow rate of 5 m^3/s. An extraction of 15% of the inlet mass flow rate exits at 600 KPa, 200C. The rest exits the turbine at 20KPa with a quality of 90% and a velocity of 20 m/s. Determine the volum..

  Dornbusch model under perfect foresight

Consider the following Dornbusch model under perfect foresight

  A cylindrical tank of diameter

A cylindrical tank of diameter 1 m has a well-rounded orifice of diameter 2 cm in its base. How long will it take an initial depth of acetone equal to 2 m to drain completely from the tank? How long would it take if the orifice were sharp-edged? If n..

  A system executes a power cycle while receiving 1050 kj by

a system executes a power cycle while receiving 1050 kj by heat transfer at a temperature of 525 k and discharging 700

  A material with a true stress strain curve

A material with a true stress strain curve? = 350 E0.25 MPa is used in wire drawing. Calculate the maximum reduction in cross sectional area per pass based on ideal conditions.

  An hydraulic turbine operates under an available head of

an hydraulic turbine operates under an available head of 85 m at a flow rate of 0.25 m3s. the electrical power output

  The subsidized cost of producing water

The subsidized cost of producing water at the El Paso Water Utilities (EPWU) Kay Bailey Hutchison (KBH) desalting plant is $1.56 per 1000 gallons. Under a contract that EPWU has with Fort Bliss, the utility sells water to the Army post at a discounte..

  Determine the resultant internal normal force acting on

determine the resultant internal normal force acting on the cross section through point of the signpost. the post is

  Waste water collection and water distribution

Water Distribution: Assume that the pipe has a 12” diameter, is plastic with C = 140 and has a total elevation change of 20 ft. How much energy is required per year to pump the water through the pipe to the customer? Assume that your pump is 80% effi..

  Design value for the molded friction material and steel disk

Design value for the molded friction material and steel disks to be used 0.06 and pressure max=1400kpa. Determine appropriate values for the disk inside dimmeter, the total number of disks and the actuating force?

  When this happens the coefficient of friction between

a 700 kg automobile is traveling at 30 msec when it suddenly applies its breaks and lock the wheels. when this happens

  A ductile metal wire of uniform cross section is loaded in

a discuss the assumption that when a piece of metal is deformed at constant temperature its volume is unchanged.b a

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd