Pre-exponential and activation energy

Assignment Help Mechanical Engineering
Reference no: EM13947959

A   copper-nickel   diffusion   couple   similar to that shown in Figure 5.1is fashioned. After a 500-h heat treatment at 1000°C (1273 K) the concentration of Ni is 3.0 wt% at the 1.0-mm position within the copper. At what temperature should the diffusion couple be heated to produce this same concentration (i.e., 3.0 wt% Ni) at a 2.0-mm position after 500 h? The pre- exponential and activation energy for the dif- fusion  of  Ni  in  Cu  are  2.7 X 10-4   m2/s  and 236,000 J/mol, respectively.

Reference no: EM13947959

Questions Cloud

Activation energy for the diffusion coefficient : Assume that the preexponential and activation energy for the diffusion coefficient are 1.5 x 10-4  m2/s and 125,000 J/mol, respectively.
Japan has a gap inflationary or recessionary gap : Japan has a gap inflationary or recessionary gap, and what is its magnitude?
What apparently major cause of total overhead variance : Construct, a Flexible Budget Performance Report for Canyonland Boat Charter Service for August. What is apparently the major cause of the total overall overhead variance for the month? Explain.
How can the project operation be implemented? : How many times should a user be allowed to mistype a password before the conversation is terminated?
Pre-exponential and activation energy : The pre- exponential and activation energy for the dif- fusion  of  Ni  in  Cu  are  2.7 X 10-4   m2/s  and 236,000 J/mol, respectively.
Evaluate matts ethical behavior taking into account : Evaluate Matt's ethical behavior, taking into account his concern for his employees. Is he justified in pursuing the actions described in the problem? If not, what should he do instead?
Differentiate between oscillation and damp cobweb model : Differentiate between oscillation and damp cobweb model
Calculate the diffusion coefficient : 1. The activation energy for the diffusion of cop- per in silver is 193,000 J/mol. Calculate the diffusion coefficient  at  1200  K  (927°C),  given that D at 1000 K (727°C) is 1.0 X 10-14  m2/s.
How far do you have to go to come into contact with poverty : If there actually is no hidden poverty in your community, how wide do you have to cast your net to encounter poverty? Outside the city limits? Outside your county? Further? How far do you have to go to come into contact with poverty

Reviews

Write a Review

Mechanical Engineering Questions & Answers

  Calculate a the work produced by the turbine per unit mass

a turbine that is well insulated runs on air. at steady state air enters at 0.5 mpa and 727 c and expands

  The air enters at 350 c and 01 mpa at a rate of 2 kgs

water is heated by air in a heat exchanger. the water enters at 150 c and 0.2 mpa and leaves at 300 c and 0.2 mpa. the

  The sphere can then be rotated about any axis with minimal

a massive precisely machined 6-ft-diameter granite sphere rests upon a 4-ft diameter cylindrical pedestal. when the

  What is the expected value of earning a college degree

If the lifetime earnings of a high-school graduate average $1,200,000, what is the expected value of earning a college degree?

  The directions respectively normal and tangential to the

a steel pipe of 12-in. outer diameter is fabricated from 14-in.-thick plate by welding along a helix that forms an

  A piston-cylinder device containing argon gas undergoes an

a piston-cylinder device containing argon gas undergoes an isothermal process at 100 c during which the pressure

  Consider some hypothetical x - y - ion pair for which the

consider some hypothetical x - y - ion pair for which the equilibrium interionic spacing and bonding energy values are

  The 50-lb package starts from rest slides down the smooth

the 50-lb package starts from rest slides down the smooth ramp and is stopped by the spring. the coefficient of static

  In a steam power plant operating on a reheat rankine cycle

in a steam power plant operating on a reheat rankine cycle steam enters the hp turbine at 15 mpa and 620oc and is

  The flow rate 5 kgs determine the direction of flow and

a fluid flows through an adiabatic device. at one end the velocity is 30 ms h 320 kjkg and s 0.695 kjkg k and at the

  Static pressure and the horsepower requirement

A centrifugal fan equipped with damper control has the damper wide open at full flow. The damper is partly closed to reduce flow to 80 percent of full load. Estimate the changes, in percent, in static pressure, and the horsepower requirement.

  All rivets are to be of the same size. load on the bracket

The bracket plate is 25 mm thick. All rivets are to be of the same size. Load on the bracket, P = 50 kN ; rivet spacing, C = 100 mm; load arm, e = 400 mm. Permissible shear stress is 65 MPa and crushing stress is 120 MPa. Determine the size of the ri..

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd