Power cycle operating between hot and cold reservoirs

Assignment Help Mechanical Engineering
Reference no: EM13709232

The data listed below are claimed for a power cycle operating between hot and cold reservoirs at 1500 K and 450 K, respectively. For each case, determine whether the cycle operates reversibly, operates irreversibly, or is impossible.

a) QH=600 kJ, W(cycle)=300 kJ, QC=300 kJ

b) QH=400 kJ, W(cycle)=280 kJ, QC=120 kJ

c) QH=700 kJ, W(cycle)=300 kJ, QC=500 kJ

d) QH=800 kJ, W(cycle)=600 kJ, QC=200 kJ

Reference no: EM13709232

Questions Cloud

Determine the decrease in exergy of the steam : Steam is throttled from 9 MPa and 500V to a pressure of 7 MPa. Determine the decrease in exergy of the steam during this process. Assume the surroundings to be at 25C.
Estimate what is the kinetic energy of the electron : An electron is released from rest at the negative plate of a parallel plate capacitor and accelerates to the positive plate. What is the kinetic energy of the electron just as it reaches the positive plate
Calculate the flow into the well : The permeability in the reservoir is a constant 200 mD. The pressure in the reservoir is 3000 psi. The reservoir is 100 m thick. A 6-inch well is drilled through the reservoir, which has two effects. First, the rock within 5 ft of the well is damaged..
Process of designing a stormwater management system : Process of designing a stormwater management system to handle the runoff from this area, and have selected the following 1-h storm as the basis of your design.
Power cycle operating between hot and cold reservoirs : The data listed below are claimed for a power cycle operating between hot and cold reservoirs at 1500 K and 450 K, respectively. For each case, determine whether the cycle operates reversibly, operates irreversibly, or is impossible.
How far is the boy from the nearest tree : A rope is attached between two trees with a boy hanging from it. The trees are 9.3 m apart and while the boy is hanging onto the rope, How far is the boy from the nearest tree
Determine what the charge of the particle : A moving particle encounters an external electric field that decreases its kinetic energy from 9460 eV to 6990 eV as the particle moves from position A to position B. Determine the charge of the particle
Air enters the turbine of a gas turbine : Air enters the turbine of a gas turbine at 1200 kPa and 1200 K, and expands to two stages. Between the stages, the air is reheated at a constant pressure of 350 kPa to 1200 K. The expansion through each turbine stage is isentropic.
Estimate how far does it travel : A car starts from rest and accelerates at a steady 6.00 m/s2. How far does it travel in the first 3.00s

Reviews

Write a Review

Mechanical Engineering Questions & Answers

  Two-phase liquid-vapor mixture of refrigerant

A tank contains a two-phase liquid-vapor mixture of Refrigerant 134a at 10 bar. The mass of saturated liquid in the tank is 32 kg and the quality is 50%. Determine the volume of the tank, in m3, and the fraction of the total volume occupied by satura..

  An irrigation pump is used to draw water from a reservoir

an irrigation pump is used to draw water from a reservoir and deliver it to an irrigation ditch at a mass flow rate of

  Determine the temperature and the mass of the vapor in

piston cylinder device contains 0.06 m3 of saturated water vapor at 350 KPa pressure. Determine the temperature and the mass of the vapor in.

  A preheater involves the use of condensing steam at 100 on

a preheater involves the use of condensing steam at 100? on the inside of a bank of tubes to heat air that enters at 1

  A rigid closed tank of volume 3 m3 contains 5 kg of wet

a rigid closed tank of volume 3 m3 contains 5 kg of wet steam at a pressure of 200 kpa. the tank is heated until the

  Find the maximum permissible unbalance

A centrifugal pump, weighing 600N and operating at 1000 rpm, is mounted on six springs of stiffness 6000 N/m each. Find the maximum permissible unbalance in order to limit the steady-state deflection to 5mmm peak-to-peak.

  What is the reference voltage you would select

Flow rate transmitter specifications are given as following: Input range: 0 to 300 GPM (Gallons Per Minute) Output range: -5V to 5V. If this transmitter needs to be connected to an A/D converter and the requirement is to detect at least 0.25 GPM diff..

  The chute is deployed is -0000180v2 speed v in feet per

the 244000-lb space-shuttle orbiter touches down at about 230 mihr. at 193 mihr its drag parachute deploys. at 35 mihr

  In an accelerator protons emerge with velocity of 25 x 108

in an accelerator protons emerge with velocity of 2.5 x 108 ms. the accelerator is 0.8km long.a if the acceleration is

  The convective heat transfer coefficient between the outer

it is 30degf outside. the temperature of the outside surface of a building is 33degf. the thickness of the building

  What is the heat transfer rate per unit length if a 10 mm

a stainless steel tube k 14 wmk used to transport a chilled pharmaceutical has an inner diameter of 36 mm and a wall

  What is the pressure at any point at the bottom of the tank

A tank with a flat bottom is filled with water to a height of 3.5 meters. what is the pressure at any point at the bottom of the tank? (You can ignore atmospheric pressure when calculating your answer.)

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd