Potential difference between plates-initial stored energy

Assignment Help Physics
Reference no: EM13561748

The parallel plates in a capacitor, with a plate area of 5.80 cm2 and an air-filled separation of 4.90 mm, are charged by a 8.10 V battery. They are then disconnected from the battery and pulled apart (without discharge) to a separation of 6.70 mm. Neglecting fringing, find (a) the potential difference (in V) between the plates, (b) the initial stored energy, (c) the final stored energy, and (d) the work required to separate the plates.

Reference no: EM13561748

Questions Cloud

How many time constants must elapse before a capacitor : How many time constants (a decimal number) must elapse before a capacitor in a series RC circuit is charged to 60.0% of its equilibrium charge?
Concept of beat frequency to tune a musical instrument : Explain how you might use the concept of beat frequency to tune a musical instrument using tuning forks. Would this method work better for an instrument that is slightly out of tune or an instrument that is completely out of tune?
How much work is done by the normal force : A factory worker pushes a 28.6 kg crate a distance of 4.9 m along a level floor at constant velocity by pushing downward at an angle of 32 degrees below the horizontal. The coefficient of kinetic friction between the crate and floor is 0.26. How m..
Resistance between the ends of the welded bar : Two cylindrical bars, each with diameter of 2.40 cm, are welded together end-to-end. One of the original bars is copper and is 0.350 m long. The other bar is gold and is 0.135 m long. What is the resistance between the ends of the welded bar at 20 oC..
Potential difference between plates-initial stored energy : The parallel plates in a capacitor, with a plate area of 5.80 cm2 and an air-filled separation of 4.90 mm, are charged by a 8.10 V battery. They are then disconnected from the battery and pulled apart (without discharge) to a separation of 6.70 mm..
What is the magnetic force on the section of wire : cA wire carries a steady current of 2.40 A. A straight section of the wire is 0.750 m long and lies along the x-axis within a uniform magnetic field, B=kT. If the current is in the +x direction, what is the magnetic force on the section of wire?
A guitar string-what is its mass per unit length : A guitar string, destined to be an upper E string, has length 98.00 cm and mass 0.460 g. What is its mass per unit length? What length of this string should be used on a guitar if the fundamental frequency is to be 330 Hz and its tension is to be 78...
Person wants to push a lamp across the floor : A person wants to push a lamp ( mass 7.2 ) across the floor, for which the coefficient of friction is 0.20. calculate the maximum height x above the floor at which the person can push the lamp so that it slides rather than tips.
How far from the wall does launched rock hit the ground : A rock is launched from a wall 15 m above a moat at a speed of 29m/s at an angle of 36 deg above horizontal. How far from the wall does the launched rock hit the ground?

Reviews

Write a Review

Physics Questions & Answers

  Find the magnitude of the resulting magnetic field

A sphere of radius R is uniformly charged to a total charge of Q. It is made to spin about an axis that passes through its center with an angular speed ω. Find the magnitude of the resulting magnetic field at the center of the sphere.

  Find the equivalent resistance

A resistor is in the shape of a cube, with each side of resistance  R . Find the equivalent resistance between any two of its adjacent corners.

  What is the electric field at the location

Question: Field and force with three charges? What is the electric field at the location of Q1, due to  Q 2 ?

  What is the maximum displacement of the bridge deck

What is the maximum displacement of the bridge deck?

  What is the magnitude of the current in the wire

What is the magnitude of the current in the wire as a function of time?

  Blackbody

Questions on blackbody, Infra-Red Detectors & Optic Lens and Digital Image.

  Gravity conveyor

Illustrate the cause of the components accelerating from rest down the conveyor.

  Calculate the dc voltage

Calculate the dc voltage applied to the circuit.

  Quadrupole moments in the shell model

Quadrupole moments in the shell model

  Determine the tension in each string

Determine the tension in each string

  Introductory mechanics: dynamics

Calculate the smallest coefficient of static friction necessary for mass A to remain stationary.

  Evaluate maximum altitude

Evaluate maximum altitude?

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd